Loading ...
Loading ...
Loading ...
liPPl:l_iNOtlll'i ,
Problem Cause Remedy Refer to
page
There is noise interfer- This unit is too close to the digital or high- Move this unit tknther away from such
ence from digital or fi=equency equipment, equipment.
radio frequency
equipment, or this unit.
The unit suddenly turns The internal temperature has become too Wait until the unit cools dov, n and then turn it
into standby mode. high and tile overheat protection circuitly back on.
has been activated.
• Tuner
Problem Cause Remedy Refer to
page
FM stereo reception is ]3
noisy.
FM
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
The desired station
cannot be tuned in with
the automatic tuning
method.
The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.
There is multipath intellZqence.
The station is too weak.
Checkthe antennaconnections.
Try using a high-quality directional FM
antenna.
Use the manual tuning method.
Adjust the antenna position to eliminale
multipath inteJq)rence.
Use a lligh-quality directional FM antenna.
Use the manual tuning method.
Preset the stations again.
Previously preset The unit has been disconnecled for a
stations can no longer long period.
be tuned in.
The signal is 'aeak or tile antenna Tighten tile AM loop antenna connections and
connections are loose, orient it for best reception.
The desired station
cannot be tuned in with
the automatic tuning
method.
34
34
35
Use the manual tuning method.
There are continuous Noises result fi-om lighming, Use an outdoor antenna and a ground wirL..
AM crackling and hissing fhlorescent lamps, motors, thelmoslats Tiffs v, ill help somewhat, but it is difficult to
noises, and other electrical equipment, eliminate all noise.
There are buzzing and A TV set is being used nearby. Move this unit away flom the TV.
whining noises
(especially in the
evening).
34
13
55
Loading ...
Loading ...
Loading ...