Loading ...
Loading ...
Loading ...
Use this feature to adjust the built-in 5-band graphic
equalizer so that the center speaker tonal quality matches
that of file left and right front speakers. You can select the
100 Hz, 300 Hz, I kHz, 3 kHz, or 10 kHz frequencies.
Control range (dB): 6 to +6
Initial setting: 0 dB for 5-band
1 Press v to select a higher frequency and A
to select a lower frequency.
2 Press < / > to adjust the level of that
frequency.
• You can monitor the center speaker sound while adjusting this
parameter by using the test tone. Press TEST befiore starting
the foregoing procedure. Once you begin this procedure, the
test tone remains at the center speaker and you can hem" how
the sound changes as you adjust the wtrious trequency levels.
To stop the test tone, press TEST.
You can assign jacks according to the component to be
used if this unit's initial settings do not correspond to
your needs. Change the following parameters to reassign
file respective jacks and effectively connect more
components. Once the inputs have been reassigned, you
can select the corresponding component by using INPUT
<3 / D on the front panel or file input selector buttons on
the remote control.
For COMPONENTVIDEO jacks A (iA[i::l]) and B
(i. I:::I[ i!!!;])
Choices: IA1 VCR, V-AUX, DTV/CBL, DVD
[B] VCR, V-AUX, DTWCBL, DVD
For OPTICAL INPUT jacks 1 (ii!!!;( i )) and 2
( :i.i!!',(2 ;,)
Choices: (1) VCR, V-AUX, DTV/CBL, DVD,
MD/CD-R, CD
(2) VCR, V-AUX, DTV/CBL, DVD,
MD/CD-R, CD
For COAXIAL INPUT jack 3 (J.(; C:.!:))
Choices: VCR, V-AUX, DTV/CBL, DVD,
MD/CD-R, CD
Use this feature to adjust the level of file bass and treble
when you are using headphones.
Control range (dB):
HP BASS .................... -6 to +3
HP TRBL (treble) ....... -6 to +3
Initial setting:
HP BASS .................... 0 dB
HP TRBL ................... (I dB
• You cammt select a specific item more than once for the same
t?pe of jack.
• When you com_ect a component to both the COAXIAL and
OPTICAL jacks, priorit._ is given to the input signals trom the
COAXIAL jack.
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn
on this unit (see page 26 for details about the input
mode).
Choices: AUTO, LAST
AUTO
Selectthis setting to allow the unit to automatically detect
the type of input signal and select the appropriate input
mode.
LAST
Select this setting to set this unit to automatically select
the last input mode used for the respective sources.
44
Loading ...
Loading ...
Loading ...