Loading ...
Loading ...
Loading ...
• Speaker placement
;'tlh'l_llPtl_
Subwoofer
The use of a subwoofer, such as the YAMAHA Active
Servo Processing Subwoofer System, is effective not only
for reinforcing bass frequencies from ally or all channels,
but also for high fidelity reproduction of the LFE (low -
frequency effect) channel included ill Dolby Digital and
DTS software. The position of the subwoofer is not so
critical, because low bass sounds are not highly
directional. But it is better to place tile subwoofer near tile
front speakers. Turn it slightly toward the center of the
room to reduce wall reflections.
Tile speaker layout above stlows the standard ITU-R
speaker setting. You call use it to enjoy CINEMA DSR
multi-channel audio sources.
Front speakers (FR and FL)
Tile front speakers are used for tile main source sound
plus effect sounds. Place these speakers all equal distance
from the ideal listening position. The distance of each
speaker fronl each side of the video nlonitor should be flae
same.
Center speaker (C)
Tile center speaker is for tile center channel sounds
(dialog, vocals, etc.). If for some reason it is not practical
to use a center speaker, you call do without it.
Best results, however, are obtained with tile full system.
Align the front face of the center speaker with tile front
face of your video monitor. Place the speaker centrally
lx_tween tile front speakers and as close to the monitor as
possible, such as directly over or under it.
Surround speakers (SR and SL)
Tile surround speakers are used tbr effect and surround
sounds. Place fllese speakers behind your listening
position, facing slightly inwards, about 1.8 nl (6 It) above
flae floor.
15
Loading ...
Loading ...
Loading ...