Loading ...
Loading ...
Loading ...
ii i! llllllllllllllllllllll !
• Automatically presetting FM stations
You can use the automatic preset tuning feature to store
FM stations. This fuuction enables the unit to
automatically tune in to FM stations with strong signals,
and to store up to 40 (8 stations in 5 groups, AI through
E8) of those stations in order. You can then recall any
preset station easily by selecting the preset number.
1 32
Press FM/AM to select the FM band.
FM/AM
F"M
Press TUNING MODE (AUTO/MAN'L MONO)
until the "AUTO" indicator lights up on the
front panel display.
TUNING MODE
_-_ AUTO
_- _ Lights up
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
The preset number, the "MEMORY" and "AUTO"
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
MEMORY
/%
t
vcN VAUX NV/eB_ OVD _zc_ TIJNER _;D
_o MEt_0n¥
i-.i i =.......... i" i i"i ..::,
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
[ql'l(l'__
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped atter
senrching all stations.
• Only FM stations with sufficient signnl strength are stored
automntically by automntic preset tuning. If the stntion you
want to store is weak in signal strength, tune in to it mnnunlly
in the monaurnl mode, and store it by following the procedure
described in "Manually presetting stations" on page 36.
Automatic preset tuning options
You can select the preset number from which this unit
will store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING <1 / 1::>to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to ES.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING <:I to begin
tuning toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
35
Loading ...
Loading ...
Loading ...