Loading ...
Loading ...
Loading ...
26
PROBLEM POSSIBLE CAUSES EASY SOLUTION
Machine is on but
ceases to operate.
The safety thermal-cut out may
have activated due to the pump or
grinder overheating.
Press the POWER button to switch the
machine off and unplug from the power
outlet. Allow to cool for about
30–60 minutes.
If problem persists, call
Breville Support.
No ground coffee
coming from grinder.
No coffee beans in hopper. Filler hopper with fresh coffee beans.
Blocked grinder chamber or chute. Clean and clear grinder chamber
and chute. Refer to ‘Advanced Cleaning
for the Conical Burr Grinder’, page 21.
Water / moisture in grinder
chamber and chute.
Clean and clear grinder chamber and
chute. Refer to ‘Advanced Cleaning
for the Conical Burr Grinder’, page
21. Ensure burrs are thoroughly dry
before re-assembling. It is possible to
use a hair dryer to blow air into the
grinder chamber.
Too much/too little
ground coffee is
being delivered to
the filter basket.
Grind amount settings are incorrect
for particular grind size.
Use the grind duration button to
increase or decrease the grind
amount. Refer to ‘Dosing’, page 13 and
‘Extraction Guide’, page 15.
Too much/too little
espresso is being
delivered to the cup.
Grind amount and/or grind size
settings and/or shot volumes
require adjustment.
Adjust the grind amount and/or grind
size settings. Refer to ‘Setting the Grind
Size’, page 13, ‘Dosing’, page 12 and
‘Extraction Guide’, page 15.
Grinder is making
a loud noise.
Blockage or foreign object
in grinder.
Remove hopper, check for debris
or blockage. If necessary, clean and
clear grinder chamber and chute.
Refer to ‘Cleaning the Conical Burr
Grinder’, page 21.
Loading ...
Loading ...
Loading ...