Loading ...
Loading ...
Loading ...
EN
31
Functions and operation
www.bora.com
5
6
7
Fig. 6.36 Turning the knob ring anticlockwise
XO
In the range from 0 to 20 minutes, the time reduces/
increases in both directions by one minute at a time, while the
increments are 5 minutes for the rest of the range.
XO
After confirming with a touch command, an acoustic signal
is heard, the cooking zone timer is activated and the set time
starts to count down.
XO
The control knob display changes to the current cooking
session and the timer symbol
is displayed.
XO
The set power level and the remaining time are shown
alternately in the control knob display for 3 seconds.
XO
Once the remaining time is less than 2 minutes, only the
remaining time is displayed.
XO
Once the remaining time is less than 5 seconds, the remaining
time flashes.
Changing active timers
XX
Repeat the steps for cooking zones with an active timer (see
“Activating cooking zone timers”).
XX
Change the set time and restart the timer.
Switching the timer off early
If the cooking session is to be continued:
XX
open the cooktop function menu;
XX
select the menu item “timer function (automatic cut-off)”;
XX
decrease the set time to
000
and confirm the entry.
XO
The timer is deactivated early and an acoustic signal is heard.
XO
Active cooking sessions are resumed unchanged.
If the cooking session is to be ended:
XX
turn the knob ring to power level
0
XO
An acoustic signal sounds and the cooking zone is switched
off.
Time lapsed
XO
The cooking zone switches off automatically.
XO
An acoustic signal is heard.
XO
0
0
0
and the timer symbol can be seen flashing in the
control knob display.
XO
After 5 seconds the acoustic signal and the flashing display
are automatically deactivated.
i
The flashing display and acoustic signal can be stopped
early with a touch command on the control knob.
XO
If necessary, the residual heat indicator
H
is then displayed.
XO
The cooking zone is deactivated and the control knob display
shows
0
.
XO
The residual heat indicator
H
appears in the control knob
display if necessary.
6.6.3 Timer function/automatic cut-off
(not on PKT3)
When a cooking zone is in operation, the automatic cut-off on
the timer function automatically switches it off once a preset
time has lapsed.
i
You can set a time range of between 1 and 120 minutes
for the timer functions.
i
When the bridging function is active, the timer is adopted
for both cooking zones.
Activating cooking zone timers
XX
Open the cooktop function menu.
XX
Do the following:
1
2
3
4
Fig. 6.34 Activating cooking zone timers
XO
The timer is activated for the chosen cooking zone.
XO
The control knob display shows the time to be set beginning
at
0
0
0
and the timer symbol .
XO
If no time is set within 4 seconds, the timer is deactivated.
The control knob display goes back to the current cooking
session.
Setting the time and starting the timer
5
6
7
Fig. 6.35 Turning the knob ring clockwise
Loading ...
Loading ...
Loading ...