Loading ...
Loading ...
Loading ...
EN
22
Functions and operation
www.bora.com
Increasing the power level
XX
Turn the knob ring clockwise
Reducing the power level
XX
Turn the knob ring anticlockwise
XO
The selected power level is shown in the display on the
extractor control knob.
6.3.3 Extractor power setting
When the power setting is activated, maximum extractor power
is available for a predefined time.
This power setting makes it possible to suction away high levels
of cooking vapours more quickly.
Activating the power setting
XX
Turn the knob ring clockwise to power setting
P
.
XO
Maximum extractor power is available.
i
After 10 minutes, the power setting is automatically
switched back to power level 9.
Deactivating the power setting early
The fan power setting is deactivated early if another power level
is set (see “Setting the fan power level”).
6.3.4 Automatic after-run
When the extractor is switched off, the automatic after-run
function is activated. The cooktop extractor continues to run at a
lower level and switches off automatically after 20 minutes. The
display switches off 10 seconds later.
Switching off the automatic after-run early
XX
touching the touch surface of the control knob
or
XX
turning the knob ring anticlockwise
XO
The after-run function will be switched off early and the
display will go out after 10 seconds.
i
BORA expressly recommends use of the cooktop
extractor after-run function.
6.4 Cooktop extractor function menu
i
Every appliance offers different additional functions.
These can be selected and activated via a function menu.
Only the functions available for each type of appliance
are shown in the corresponding function menu.
i
The cooktop extractor function menu contains both
system functions and cooktop extractor functions.
i
If all connected appliances are switched off (= power
level 0), the whole system is automatically switched off
after 10 seconds.
The cooktop extractor was switched on
XO
The automatic after-run function is started.
XO
As soon as the after-run period is complete, the appliance is
automatically switched off.
XO
The display switches off after 10 seconds.
The cooktop was switched on
XO
H
is shown in the control knob display for previously active
and still hot cooking zones (residual heat indicator).
XO
If there is no longer any residual heat, the display will switch
off after 10 seconds.
6.3 Operating the cooktop extractor
i
The cooktop extractor must only be operated with BORA
cooktops.
i
The cooktop extractor can only be operated when the
grease filter components and cover flap are installed.
i
Both cooktop extractor functions and system functions
can be operated using the cooktop extractor control knob.
6.3.1 General operating instructions for the
cooktop extractor
Recommendations for efficient vapour extraction
XX
In the case of tall cooking pots, place the lid on at an angle
so that the cooking vapours are guided towards the cooktop
extractor.
XX
Only operate the cooktop extractor at the minimum power
level required for effective vapour extraction. This enables
you to improve the performance of the odour filters in
recirculation mode.
XX
Only operate the hob at the minimum power level required
for cooking. This reduces the cooking vapours and the power
consumption.
XX
Avoid strong drafts.
6.3.2 Setting the fan power level
The power levels are controlled by turning the knob ring to the
desired power level (electronic power adjustment).
Fig. 6.6 Setting the fan power level
Loading ...
Loading ...
Loading ...