945-000058 User Manual

Loading ...

English 18

1. Name of the Part being Modied

This will either be the Stick or the Throttle unit for the X-56. If you wish to change the part

thatyou’re not currently on, use the back button (5) to go back to the selection screen.

2. Modiable Axes

This shows a list of all modiable axes. The Stick has three modiable axes:

- X Axis

- Y Axis

- Rudder Axis

The Throttle unit has six modiable axes:

- Left Throttle

- Right Throttle

- Rotary 1

- Rotary 2

- Rotary 3

- Rotary 4

3. Manual Axis Adjustment and Test Area

This area will show you how the current response curves / dead zones / saturation points are

setup on the selected axis. You can also adjust the center deadzone, the range saturation,

physical saturation, and the response curve on the selected axis. There is also a cross-hair

whichwill show the physical position of the axis you are manipulating.

4. Spring Values

This is a reference section when you are adjusting the axes on the Stick. It will act as a guide

for axis modication, and you may choose diering axis curves or deadzones depending on

theSpring you have tted to the Stick. If you are modifying the Throttle unit’s axes you will

notsee this reference section.

5. Back Button

Takes you to the device selection screen.

6. Physical Axis Adjustment Slider

Allows the ends of the axes, the far left and far right on the X Axis or full up and full down on

theY Axis, to be moved inwards towards the center point. It is similar to setting up a deadzone

at the far ends of your axis.

Loading ...

User Manual - Page 17