Loading ...
Loading ...
Loading ...
Fig. KK
9etii_g_ for standard _row_ mo_dir_g ying f_at on
_ompou_d miter saw _ab_e
Fig. LL
Co¢t_po nd c,l_ c(wl t'_sold Ags
Bevel/Miter Settings
KEY BEMEL IvlrrlER TYPE OF CUT
SETTING SETTING
IL 33.9° 31.6°
Right
IR 33.9_' 31.6°
Left
OL 33.9° 31.6°
Left
OR 33.9° 31.6°
Rig_
Jnsidecorner-Left side
I. Positiontopof molting agairst
fence.
2.1VitertablesetatRIGHT31.6_.
3.LEFT sideisfinishedpiece,
Insidecorner-Right side
1.PosiHonbottomof molding
againstfence.
2.rvltertableset at LEFT31.6°.
3,LEFTside isfinishedpiece,
Outsidecorner-Let side
t.Posi_onbottomof molding
againstfence,
2.rvttertableset at LEFT31.6°.
&RIGHT sideisfinishedpiece,
Outsidecorner-Right side
1,PosiUantopof molting against
fence.
2.rvltertableset at RIGHT3t .6°,
&RIGHT sideisfinished piece.
CHANGING THE BATTERIES (Fig. LL)
• Unplug your saw.
Failureto unplug your saw couldresult inaccidental
starting causing possible serious personal injury.
1. Remove the laser guide from the saw.
2. Loosen and remove the two screws, then remove the
laser guide cover.
3. Remove the three batteries as arrow on Fig. LL and
replace new batteries.
4. Replace the laser guide cover and two screws and
tighten.
Note: Replace the batteries with batteries that have a
rating of 1.5 volts (Number LR44).
When replacing the batteries, the battery cover should be
thoroughly cleaned. Use a soft paintbrush or similar device,
to remove all sawdust and debris.
CHANGING THE BELT (Fig. KK)
• Unplug your saw.
1. Loosen the bolts (1) and remove the belt cover.
2. Turnthe screw (2) anti-clockwise with an Allen
wrench to move the motor to forward.
3. Remove and replace the belt.
4. Turnthe screw (2) clockwise with an Allen wrench to
move the motor to rearvcard. Do not over tighten.
5, Replace the belt cover and tighten the bolts.
Fig. KK
Loading ...
Loading ...
Loading ...