Falcon PROP90FXPDFGB-CHLPG 90cm Freestanding Dual Fuel Oven/Stove

User Manual - Page 41

For PROP90FXPDFGB-CHLPG.

PDF File Manual, 56 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.
37
OFF
n
BEFORE SERVICING ANY GAS CARRYING
COMPONENTS TURN OFF THE GAS SUPPLY
n
Check the appliance is gas sound after completion
of service. When checking for gas leaks do not use
washing up liquid – this can corrode. Use a product
specically manufactured for leak detection.
n
DO NOT use reconditioned or unauthorised gas
controls.
n
Disconnect from the electricity supply before
servicing, particularly before removing any of the
following: control panel, side panels, hotplate tray
or any electrical components or covers.
n
Before electrical reconnection, check that the
appliance is electrically safe.
1. Panels
1. To Remove the Control Panel
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control knobs. Open the oven door. Undo the
screws holding the oven beak to the cooker and remove (Fig.
11.1).
Remove the xing screws on the underside of the control. The
control panel should drop down slightly. It is held at each end
by 2 holes in the top edge (Fig. 11.2) that locate on the tags
on the inner panel.
Lift up the control panel so that it is clear of the tags and pull
the control panel forwards (Fig. 11.3).
Disconnect the wiring from the rear. Lift the panel clear of the
cooker.
Replace all parts in reverse order. When replacing any
electrical connections refer to the wiring diagram.
2. To Remove the Side Panels
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel (see 1. To Remove the Control
Panel). Undo the 3 screws securing the plinth to the cooker
and remove.
Situated below the edge at the panel front corner is the lower
retaining screw. Remove this screw.
Remove the side panel retaining screw on the upper front
edge, and undo the 2 xings on the rear of the side panel.
Remove the panel by pulling it away from the cooker.
ArtNo.272-0014 - 90 Pro+ pyro- Removing the control panel
OFF
ArtNo.270-0019 - Proplus tags 2
Fig. 11.1
Fig. 11.2
Fig. 11.3
Fig. 11.4
11. Servicing
Loading ...
Loading ...
Loading ...