Loading ...
Loading ...
Loading ...
20
Self-clean oven
n
WARNING: Remove all cookware, shelves,
and the shelf supports from the oven before using
the self-clean function. If the shelves and supports
are left in the oven they will discolour and become
rough.
n
WARNING: Using the self-cleaning function
results in higher temperatures than those for normal
cooking. Under such conditions the surfaces may get
hotter than usual so children should be kept away.
n
WARNING: Remove the divider before using
the self-clean function. See “Energy saving panel”
page 12’.
n
DO NOT clean the door gasket: the door gasket is
essential for a good seal. Care should be taken not to
rub, damage or move the gasket.
n
DO NOT use oven cleaners: no commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
n
Clean only parts listed in this User Guide.
n
DO NOT use the oven light while in self-cleaning
mode.
Before using the self-clean function
Pre-clean any areas that are not reached by the self-clean
cycle, such as the outer edges of the oven door. Wipe up any
excess fat or liquids.
Before operating the self-clean cycle, use hot water and
detergent or a paste of water and baking soda to remove any
dicult spots. Rinse o all residue with vinegar water. This
will prevent this soil from being baked on by the high heat of
the self-cleaning cycle.
Self-clean operation
NOTE: The minute minder can still be used when the clock is
controlling the pyrolytic cycle.
Set the oven function control to self-clean (Fig. 6.6). The
timer display will now show a ‘
P ’ (Fig. 6.7).
Press the [
] button once (Fig. 6.8) to set the default
cleaning time (3hours). The cleaning cycle will start
immediately.
To adjust the cleaning cycle duration, press and hold the [
]
button. The ‘P ’ will no longer be displayed and [AUTO] will
ash. Press either the [–] or [+] buttons and set the required
duration; see Table 6.1. Release the [
] button once the
duration is set.
Note that the maximum time for the self-cleaning operation
is 4 hours. The minimum time is 1 hour.
The cooling fan will switch to high speed and as soon as a
certain temperature is reached the oven door will lock as
indicated by the illuminated interlock neon (Fig. 6.9).
ArtNo.272-0007
Prof+ pyro US - MF oven -
Self clean setting
OFF
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.272-0008
Prof+ pyro US - MF oven -
Self clean light on
OFF
Hours Soiling
2 hours Normal clean
3 hours Heavy soiling
4 hours Very heavy soiling
Table 6.1
Fig. 6.6
Fig. 6.7
Fig. 6.8
Fig. 6.9
Loading ...
Loading ...
Loading ...