Loading ...
Loading ...
Loading ...
EN
25
Operation
www.bora.com
6.3.5 Childproofing feature
INFO The childproofing feature can only be activated
or permanently deactivated if both knob brings
are at the 12 o’clock position and no function
is active.
Activating the childproofing feature
Press the touch-operated area on a control knob for
5 seconds.
An acoustic signal sounds and
L
appears on the control
knob display. The display goes blank after 10 seconds
and the childproofing feature is activated.
Permanently deactivating the childproofing
feature
Press the touch-operated area on a control knob for
5 seconds.
An acoustic signal sounds and
0
appears on the control
knob display. The display goes blank after
10 seconds and the childproofing feature is
permanently deactivated..
Deactivating the childproofing feature for a
cooking session
Turn the selector ring from the 12 o’clock position to a
power level.
L
appears on the control knob display.
Press the touch-operated area on a control knob for
5 seconds.
An acoustic signal sounds and the selected power level
appears on the control knob display.
The childproofing feature is now deactivated for this
cooking session and the desired power level can be
set.
The childproofing feature is activated again the next
time the cooktop is switched on.
INFO If the cooktop is switched off at the end of the
cooking session (turn the selector ring to the
12 o’clock position), the childproofing feature
is automatically re-activated.
6.3.6 Using the timer function
INFO You can set a time range of between
1 and 120 minutes for the timer functions.
Setting the time
Turn the selector ring to the 11 o’clock position.
t
appears on the control knob display.
Tap the touch-operated area.
An acoustic signal sounds and
000
appears on the
control knob display.
Turn the selector ring within 3 seconds to set the timer.
Turning the ring clockwise increases the time (starting
from 0 minutes); turning it anti-clockwise reduces the
time (starting from 120 minutes).
Switching on the bridging function
Both control knobs are set to the 12 o’clock position.
Press the touch-operated area of both control knobs at
the same time for at least 1 second.
%
appears on the left control knob and
0
on the right
one.
Turn the selector ring on the right-hand control knob to
the desired power level within 3 seconds.
The power level (for both grilling zones) appears on the
right-hand control knob’s display.
The right-hand control knob can now be used to adjust
the power levels for both grilling zones.
If the right-hand selector ring is not turned to a power
level within 3 seconds of activating the bridging
function, this function is disabled and the cooktop
switched off.
Switching off the bridging function
Turn the right-hand control knob to the 12 o’clock
position.
The bridging function and cooktop are switched off.
6.3.4 Cleaning function
INFO The selector ring position for the cleaning
function is between the 12 o’clock and
1 o’clock positions (see low power levels).
Turn the selector rings on both control knobs
approximately 15° clockwise from the 12 o’clock
position until they engage.
c
appears on the control knob displays.
The crescent-shaped grilling zone indicators flash while
the zones are heating up or cooling down.
Wait until the grilling zone indicators have stopped
flashing.
Once the optimum cleaning temperature of 70°C has
been reached, the grilling zone indicators stop flashing.
Clean the Tepan stainless steel grill as described in the
Cleaning and maintenance section.
INFO The cleaning function must be activated for
both grilling zones to prevent the risk of burns.
INFO Only start cleaning the grilling zones once
the optimum
cleaning temperature has been
reached (see also the Cleaning section).
Switching off cleaning function
Turn both control knobs to the 12 o’clock position.
The cleaning function and the cooktop are
switched off.
Loading ...
Loading ...
Loading ...