Loading ...
Loading ...
Loading ...
EN
17
Installation
www.bora.com
≥70
90 90 909090 196 196 196 196
370 370
370
110
1 1 1 1
110
Ø50 ±0,5
Fig. 5.11 Bore holes for 3 cooktops and 2 extractors
[1] Bore holes for socket (2x external)
[2] Bore holes for control knobs (8x)
[3] Cooktop (3x)
[4] Cooktop extractor (2x)
[5] Worktop
[6] Floor unit’s panel
5.5.2 Installing the cooktop
321
Fig. 5.12 Inserting the cooktop
[1] Worktop cut-out
[2] Tepan stainless steel grill
[3] Connections for the control knob and automatic extraction
system
Insert the Tepan stainless steel grill [2] into the
worktop cut-out [1].
Precisely align the Tepan stainless steel grill [2].
Please note that during normal installation, the
connections for the control knob and the automatic
extraction system [3] are at the back.
Fig. 5.9 Installing the control knob
Pull off the selector ring.
Unscrew the fixing nut.
Push the control knob through the drilled hole in the
floor unit’s panel from the front.
Screw the fixing nut onto the control knob from the
back and lightly tighten it.
Vertically align the control knob in the 12 o’clock
position based on the markings.
Tighten the fixing nut.
Place the selector ring on the control knob.
Bore hole examples
≥70
90 90 90
Ø50 ±0,5
90 196 196
370 370
110
1 1
Fig. 5.10 Bore holes for 2 cooktops and 1 extractor
[1] Bore holes for socket (2x external)
[2] Bore holes for control knobs (5x)
[3] Cooktop (2x)
[4] Cooktop extractor
[5] Worktop
[6] Floor unit’s panel
Loading ...
Loading ...
Loading ...