Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
35
5.2 To Remove an Oven Element Thermal Cut-out
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the cover box. Undo the
cover screws and lift clear. The cut-out is located on the earth plate
beside the oven element connections. Disconnect the cut-out
wiring. Undo the xings that secure the cut-out to the earth plate
and remove. Fit the replacement control and reassemble in reverse
order.
5.3 To Remove an Oven Inner Back
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Open the door and remove the shelves. Remove the screws and
washers securing the inner back to the back of the oven
(Fig. 10.6). Carefully lift away the inner back.
Reassemble in reverse order, making sure that the 4screws and
washers are fully tightened.
5.4 To Remove the Fan Oven Element
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the oven inner back (see 5.3). Remove the 2 screws from
the top of the element and the one from the bottom of the element
inside the oven (Fig. 10.7).
Lift the element out carefully, disconnecting the terminals
connected to the element (noting their positions).
If it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear.
Remove the screws securing the electric cover to the back sheet,
remove the cover and disconnect the terminals from the rear.
5.5 To Replace an Oven Fan
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the rear. Remove the
screws securing the electric cover to the back sheet and remove the
cover.
Disconnect the 3 terminals connected to the fan noting their
position. Remove the oven inner back (see 5.3). Hold the fan blade
and remove the centre nut (left-hand thread) 2 brass washers, fan
blade and circlip. Unscrew the fan retaining nuts and washers (3 o
each) and lift the fan away from the rear of the cooker.
Fit the new fan and reassemble in reverse order.
Check the operation of the oven.
ArtNo.320-0020 Oven back fixing screws
Fig. 10.6
&MFNFOUmYJOHTDSFXT
ArtNo.321-0005 Fan oven element
Fig. 10.7
Loading ...
Loading ...
Loading ...