Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Focus Spot 4Z/Focus Spot 4Z Pearl User Manual Page 24
Focus Spot 4Z/Focus Spot 4Z Pearl Operating Instructions
TIME INFO - In this submenu are able to check the current running time, total running time, and last clear
time. This submenu will also let you clear/reset the “Total Time” and “Last Time” hours.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “Information” is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time.Info” is highlighted, then press ENTER.
3. Press UP or DOWN buttons to scroll through the time information selections.
• “Current Time” - This will display the current running time of the fixture in hours. Press the ENTER
or MODE button to exit.
• “Total Time” - This will display the total running time of the fixture in hours. Press the ENTER or
MODE button to exit.
• “Last Time” - This will display the last time the running time was cleared. Press the ENTER or
MODE button to exit.
• “Time PIN” - This function will allow you to clear the “Last Time” and “Total Time” displays.
• “Clear Last” - This function will allow you to clear the “Last Time” counter. Access “Time PIN”
and press ENTER. Using the UP and DOWN buttons set the “PIN” to “050” and press ENTER.
Return to the “Clear Last” function and press ENTER. Press the LEFT or RIGHT buttons
until your selection is displayed and press ENTER to confirm. “ON” will clear the time. “OFF” will
return you to the Time Menu.
• “Clear Total” - This function will allow you to clear the “Total Time” counter. Access “Time PIN”
and press ENTER. Using the UP and DOWN buttons set the “PIN” to “060” and press ENTER.
Return to the “Clear Total” function and press ENTER. Press the LEFT or RIGHT buttons until
your selection is displayed and press ENTER to confirm. “ON” will clear the time. “OFF” will
return you to the Time Menu.
TEMPERATURE INFO - This will allow you to check the moving head temperature.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “Information” is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Temp. Info” is highlighted, then press ENTER.
3.. “T:XXX” will now be displayed. “XXX” represents the current temperature of the moving head.
4. Press the ENTER button or MODE button to exit.
FAN SPEED - With this function, you can control the base fan speed.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “Information” is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fan Speed” is highlighted, then press ENTER.
3. The current fan speeds of “Fan1” and “Fan2” will now be displayed.
4. Press the ENTER or MODE button to exit.
Loading ...
Loading ...
Loading ...