ADJ FOCUS SPOT 4Z 200W LED Moving Head Spot Fixture

User Manual - Page 21

For FOCUS SPOT 4Z.

PDF File Manual, 34 pages, Read Online | Download pdf file

FOCUS SPOT 4Z photo
Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Focus Spot 4Z/Focus Spot 4Z Pearl User Manual Page 20
Focus Spot 4Z/Focus Spot 4Z Pearl Operating Instructions
MOVEMENT SPEED - With this function you can set the pan and tilt movement speed.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “Function” is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until “Status” is highlighted then press ENTER.
3. Press UP or DOWN buttons until “Move. Speed” is highlighted then press ENTER.
4. Either “Speed1”, “Speed2”, “Speed3” or “Speed4” will be displayed. Use the UP or DOWN buttons to
nd your desired setting.
5. Press the ENTER button to conrm your selection or press the MODE button to exit.
HIBERNATION - With this function the LEDs and step motors will power o if there is no DMX signal within
15 mins (factory defualt). Once it receives a DMX signal, the xture will reset itself.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “Function” is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until “Status” is highlighted then press ENTER.
3. Press UP or DOWN buttons, until “Hibernation” is highlighted then press ENTER.
4. The current stand by setting will be displayed, use the LEFT or RIGHT buttons to adjust the hibernation
period between “01M-99M” or “O”.
5. Press the ENTER button to conrm your selection or press the MODE button to exit.
DIMMER MODE - With this function you can change dimmer curve setting. See page 28 for the Dimmer
Curve Chart.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that “Function” is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Dim Mode” is highlighted then press ENTER.
3. The dimmer curve settings will now be displayed.
4. Use the UP or DOWN buttons to nd your desired dimmer curve setting.
5. Press the ENTER button to conrm your selection or press the MODE button to exit.
TEMPERATURE C/F - With this function, you can change the temperature display to show either Celsius or
Fahrenheit.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that “Function” is
highlighted, then press ENTER.
2. Press UP or DOWN buttons until “Temp. C/F” is highlighted then press ENTER.
3. Either “Celsius” or “Fahrenheit” will be displayed, use the UP or DOWN buttons to nd your desired setting.
4. Press the ENTER button to conrm your selection or press the MODE button to exit.
Loading ...
Loading ...
Loading ...