ADJ FOCUS SPOT 4Z 200W LED Moving Head Spot Fixture

User Manual - Page 13

For FOCUS SPOT 4Z.

PDF File Manual, 34 pages, Read Online | Download pdf file

FOCUS SPOT 4Z photo
Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Focus Spot 4Z/Focus Spot 4Z Pearl User Manual Page 12
All xtures should be given a DMX starting address when using a DMX controller, so the correct xture
responds to the correct control signal. This digital starting address is the channel number from which
the xture starts to “listen” to the digital control signal sent out from the DMX controller. The assignment
of this starting DMX address is achieved by setting the correct DMX address on the digital control
display on the xture.
You can set the same starting address for all xtures or a group of xtures, or set dierent addresses
for each individual xture. Setting all xtures to the same DMX address will cause all xtures to react
in the same way, in other words, changing the settings of one channel will aect all the xtures
simultaneously.
If you set each xture to a dierent DMX address, each unit will start to “listen” to the channel number
you have set, based on the quantity of DMX channels of each xture. That means changing the settings
of one channel will only aect the selected xture.
In the case of the Focus Spot 4Z/Focus Spot 4Z Pearl, when in 16 channel mode you should set the
starting DMX address of the rst unit to 1, the second unit to 17 (16 + 1), the third unit to 33 (17 + 16),
and so on. (See the chart below for more details.)
Focus Spot 4Z/Focus Spot 4Z Pearl DMX Addressing
Channel Mode
Unit1
Address
Unit2
Address
Unit3
Address
Unit4
Address
16Channels 1 17 33 49
18 Channels 1 19 37 55
22Channels 1 23 45 67
Loading ...
Loading ...
Loading ...