ADJ FOCUS SPOT 4Z User Manual

Loading ...

ADJ Products, LLC - www.adj.com - Focus Spot 4Z/Focus Spot 4Z Pearl User Manual Page 18

Focus Spot 4Z/Focus Spot 4Z Pearl Operating Instructions

The main menu is accessed by pressing the MODE button. Browse through the menu by using the

UP, DOWN, RIGHT, & LEFT buttons. Press the ENTER button to access the desired menu. You can

scroll through the submenus using the UP and DOWN buttons. To conrm every selection press the

ENTER button. You can exit every menu and submenu by pressing the MODE button. The unit will

automatically exit the menus if no buttons are pressed after 10 seconds.

System Menu Access: To access the system menu when the xture is not powered using the

internal battery, press and hold the MODE button to illuminate the LCD screen until the DMX

address is displayed. Then navigate to the desired system menu.

SET ADDRESS - With this function, you can adjust and set your desired DMX address.

1. Access the main menu, and press the UP or DOWN buttons until “Receive” is higlighted, then press

ENTER.

2. “Set Address” will now be displayed, press ENTER. The current DMX address will now be displayed.

3. Use the UP or DOWN buttons to adjust the DMX address.

4. Press the ENTER button to conrm your address or press the MODE button to exit.

USER MODE - This mode will let you select your desired DMX Channel mode.

1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “User Mode” is

highlighted, then press ENTER. Hightlight “User Mode” once again and press ENTER.

2. Use the UP or DOWN buttons to scroll through the 3 DMX Channel Modes. See the DMX channel modes

listed below. Press the ENTER button to conrm your selection or press the MODE button to exit.

• Basic Mode - This is 16 Channel Mode.

• Standard Mode - This is 18 Channel Mode.

• Extended Mode - This is 22 Channel Mode.

User Mode A B C - These are customizable DMX modes. Select either of these modes and set the amount of

DMX Channels and what each channel does.

3. Press the ENTER button to corm your settings or press the MODE button to exit.

NO DMX MODE - With this function if the DMX signal is suddenly lost, the unit will automatically go into 1 of

3 modes.

1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “Function” is highlighted,

then press ENTER.

2. Press the UP or DOWN buttons until “Status” is highlighted, then press ENTER.

3. Press the UP or DOWN buttons, until “No DMX Mode” is highlighted, then press ENTER.

4. Either “Hold” (Last DMX setting), “Black” (Blackout), or “Auto” (Auto Program) will be displayed, use the

UP or DOWN buttons to scroll through the options.

5. Press the ENTER button to conrm your selection or press the MODE button to exit.

Loading ...

ADJ FOCUS SPOT 4Z 200W LED Moving Head Spot Fixture