1. Home
  2. ADJ
  3. ADJ FOCUS SPOT 4Z User Manual
  4. Page 24

ADJ FOCUS SPOT 4Z 200W LED Moving Head Spot Fixture

User Manual - Page 24

For FOCUS SPOT 4Z.

PDF File Manual, 34 pages, Read Online | Download pdf file

FOCUS SPOT 4Z photo
Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Focus Spot 4Z/Focus Spot 4Z Pearl User Manual Page 23
Focus Spot 4Z/Focus Spot 4Z Pearl Operating Instructions
SLAVE SET - This function lets you designate the unit as the slave in a Master-Slave conguration.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that “Function” is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Disp.Set” is highlighted, then press ENTER.
3. Press the UP or DOWN buttons until “Slave Set” is highlighted, then press ENTER.
4. Either “Slave 1”, “Slave 2”, or “Slave 3” will be displayed. Use the UP or DOWN buttons to nd your desired
setting.
5. Press the ENTER button to conrm your selection or press the MODE button to exit.
AUTO PROGRAM - This function allows the internal programs to run in either stand-alone or master/
slave set up. In “Master” mode the xture will send DMX data to other xtures connected via DMX cable. In
“Alone” mode the xture will operate as a single xture. The program for this mode is selected in the “Program”
section of the control menu. You can set the number of steps under “Edit.Prog”. You can edit the individual
scenes under “Edit Scenes”.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that “Function” is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Disp.Set” is displayed, press ENTER.
3. Press the UP or DOWN buttons until “Auto. Prog” is displayed, and press ENTER.
4. Either “Master” or “Alone” will be displayed. Use the UP or DOWN buttons to nd your desired setting.
5. Press the ENTER button to conrm your selection or press the MODE button to exit.
DEFAULT SETTINGS - With this function you can restore the factory settings.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that “Function” is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons so that “DFSE” is highlighted, then press ENTER.
3. Either “O” or “On” will now be displayed. Use the LEFT or RIGHT buttons to nd your selection. Selecting
“On” will restore the factory settings.
4. Press the ENTER button to conrm your selection or press the MODE button to exit.
USB UPGRADE FILE - This submenu is used for any future software updates. Check www.adj.com
and this units webpage for any software updates. Download the software update to a ash stick and
plug the ash stick into the Service Port slot located on the front of the unit.
1. Contact ADJ customer service for help when updating software.
Loading ...
Loading ...
Loading ...