Loading ...
Loading ...
Loading ...
20
TROUBLESHOOTING
CAUTION: Make sure the grill is completely cool and unplugged before you do any
inspection, cleaning, maintenance or service work.
Problem
Potential
Cause
Solution
Grill is not working properly
Power
Make sure the power cord is plugged
in. Verify there is power at the electrical
outlet.
Fuse
Remove the control to check the fuse
on the back. Replace the fuse if blown.
Hot Rod
If both the Draft Inducer Fan and the
Auger Driver Motor are operating, the
Hot Rod needs to be replaced. If one or
both are not operating, please contact
us.
Control Board
Remove the Control Board to check
the wires and connections. Please
contact the manufacturer or a qualified
technician if electrical work is required.
Auger Drive
Motor
Locate the small fan blade on the back
of the auger drive motor and turn the
unit on. If the fan does not turn, it
indicates the Auger Drive Motor need
to be replaced.
Fire goes out
Too much ash
Clean the ash. Refer to
MAINTENANCE & CLEANING.
How to start
SMOKE setting
Start your grill on the SMOKE setting
with the lid open, after 2 minutes, close
the lid and turn to any cooking setting
desired.
Loading ...
Loading ...
Loading ...