Loading ...
Loading ...
Loading ...
8
2.Assembling of Hopper
Insert Hopper Assembly II (61) into Hopper Assembly I (3), align the holes. Insert the Bolts
(58) through the holes in the Hopper and Hexagon Kep Nuts (59), then open the Hopper Lid
and tighten it from inside. The four sides are installed in the same way.
3.Mounting the Hopper to the Chamber
1.Remove the Gaskets and Bolts from the Hopper, open the Lid, insert the Hopper into the
Chamber, then using Bolts and Gaskets install it in sequence from inside.
2.Locate the RTD plug-in connector coming from the mounted RTD inside the grill frame.
Connect this with the mating connector located on the outside of the hopper burner
assembly.
Loading ...
Loading ...
Loading ...