Loading ...
Loading ...
Loading ...
18
Removing the lter
If you want to use the appliance without the lter, you must
remove it and notify the appliance of its removal.
Proceed as follows:
1. Extract the tank and exhausted lter;
2. Press the P button to enter the menu;
3. Turn the selection dial (g. 8) until “Install lter*” is
displayed;
4. Press the button;
5. “Disable?” is displayed;
6. Press the
button to conrm and the button to
exit the menu.
TECHNICAL DATA
Tensione:220-240V~50/60Hzmax.10A
Absorbed power: 1450W
Pressure: 15 bar
Max. water tank capacity: 1,8 l
Size LxHxD: 238x351x430 mm
Cable length: 1,75 m
Weight: 9,7 kg
Coee beans container capacity: 250 g
The appliance complies with the following EC
directives:
•EuropeanStand-byRegulation1275/2008;
•Low VoltageDirective2006/95/ECandsubsequent
amendments;
•EMCDirective2004/108/ECandsubsequent
amendments;
•Materialsandaccessoriescomingintocontactwithfood
conform to EC regulation 1935/2004.
DISPOSAL
In compliance with European directive 2002/96/EC,
the appliance must not be disposed of with
household waste, but taken to an authorised waste
separation and recycling centre.
7. Close the tank with the
lid, then put the tank
back in the machine.
When you install the lter,
you must notify the appliance
of its presence.
8. Press the P button to
enter the menu;
9. Turn the selection dial
(g. 8) until “Install
lter” is displayed;
10. Press the
button;
11. “Enable?” is displayed;
12. Press the button to conrm the selection. “Hot water
Conrm?” is displayed;
13. Position a container under the hot water spout (min.
capacity: 500 ml);
14. Press the button to conrm the selection. The
appliance begins hot water delivery and the message
“Please wait” is displayed;
15. After delivery, the appliance is automatically ready to make
the next drink.
The new lter is active and indicated by an asterisk displayed
under “Install lter” in the menu. You can now use the
appliance.
Replacing the lter
When “Replace lter” is displayed, after two months (see
date indicator) or when the appliance has not been used for 3
weeks, you should replace the lter:
1. Extract the tank and exhausted lter;
2. Take the new lter out of its packet and proceed as
illustrated in points 2, 3, 4, 5 and 6 in the previous
section.
3. Position a container with a minimum capacity of 500 ml
under the hot water spout.
4. Press the P button to enter the menu.
5. Turn the selection dial until “Replace lter” is displayed.
6. Press the
button.
7. “Conrm?” is displayed.
8. Press the button to conrm the selection;
9. “Hot water Conrm?” is displayed;
10. Press the button to conrm the selection. The
appliance begins hot water delivery and the message
“Please wait” is displayed;
11. After delivery, the appliance is automatically ready to make
the next drink.
The new lter is now active and you can use the coee
machine.
Loading ...
Loading ...
Loading ...