ECAM23460S User Manual

Loading ...

Replacing the lter

For instructions on how to replace the lter, see the section

“Replacing the lter” (page 18).

Adjust time

To adjust the time on the display, proceed as follows:

1. Press the P button to enter the menu;

2. Turn the selection dial (g. 8) until “Adjust time” is

displayed;

3. Press the

button (g. 2).

4. Turn the selection dial (g. 8) to change the hours;

5. Press the

button to conrm;

6. Turn the selection dial (g. 8) to change the minutes;

7. Press the

button to conrm.

This sets the time. Press the

button to exit the menu.

Auto-start

You can set the auto-start time in order to have the appliance

ready at a certain time (for example in the morning) so you can

make coee immediately.

Please note:

To enable this function, the time must already be set correctly.

To enable auto-start, proceed as follows:

1. Press the P button to enter the menu;

2. Turn the selection dial (g. 8) until “Auto-start” is

displayed;

3. Press the

button. “Enable?” is displayed;

4. Press the button to conrm;

5. Turn the selection dial to choose the hours;

6. Press the button to conrm;

7. Turn the selection dial (g. 8) to change the minutes;

8. Press the button to conrm;

9. Then press the

button to exit the menu.

Once the time has been conrmed, activation of auto-start is

indicated by the symbol displayed alongside the time

and under “Auto-start” in the menu.

To disable the function:

1. Select auto-start from the menu;

2. Press the button. “Disable?” is displayed;

3. Press the button to conrm.

The symbol is no longer displayed.

Auto-O

The time can be changed so that the appliance switches o

after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-o, proceed as follows:

1. Press the P button to enter the menu;

2. Turn the selection dial (g. 8) until “Auto-o” is

displayed;

3. Press the

button;

4. Turn the selection dial (g. 8) until the required operating

time (15 or 30 minutes, or 1, 2 or 3 hours) is displayed;

5. Press the

button to conrm;

6. Then press the

button to exit the menu.

Auto-o is programmed.

Energy saving

Use this function to enable or disable energy saving.

When enabled, the function reduces energy consumption in

compliance with European regulations.

When energy saving mode is active, an asterisk appears under

“Energy saving” in the menu.

To enable or disable energy saving, proceed as follows:

1. Press the P button to enter the menu;

2. Turn the selection dial (g. 8) until “Energy saving” is

displayed;

3. Press the

button. “Disable?” is displayed (or

“Enable?” if the function has already been disabled);

4. Press the button to disable energy saving mode;

5. Then press the

button to exit the menu.

When the function is active, if the machine is not used for some

time, “Energy saving” is displayed.

Please note!

•Wheninenergysavingmode,afewsecondselapse

before the rst coee, cappuccino or milk based coee is

delivered as the appliance must heat up again.

•Toprepareanydrink,pressanybuttontoexitenergy

saving, then press the button corresponding to the drink

you want to make.

•Ifthemilkcontainerisinserted,“Energysaving”isnot

activated.

Setting the temperature

To modify the temperature of the water used to make the

coee, proceed as follows:

1. Press the P button to enter the menu;

2. Turn the selection dial (g. 8) until “Set temperature” is

displayed;

3. Press the

button;

4. Turn the selection dial until the required temperature

(●=low; ●●●●=high) is displayed;

5. Press the button to conrm;

6. Then press the

button to exit the menu.

Setting water hardness

For instructions on setting water hardness, see page 17.

Loading ...

User Manual - Page 11