1. Home
  2. Delonghi
  3. Delonghi ECAM23460S User Manual
  4. Page 14

User Manual - Page 14

For ECAM23460S.

Loading ...
Loading ...
Loading ...
13
1. Press the button (g. 7) repeatedly until “Pre-
ground” is displayed.
2. Make sure the funnel is not blocked, then add one level
measure of pre-ground coee (g. 14).
3. Place a cup under the coee spouts.
4. Press the 1 cup button (g. 9).
5. Preparation begins. The amount of coee selected is
displayed together with a progress bar which gradually
lls as preparation progresses.
Please note:
If “energy saving” mode is active, you may have to wait a few
seconds before the rst coee is delivered.
MAKING CAPPUCCINOS AND MILK BASED
COFFEES
Please note:
•Toavoidproducingmilkwithpoorfrothorlargebubbles,
always clean the milk container lid and hot water
connection nozzle as described in the section “Cleaning
the milk container” on pages 14 and 16.
Filling and attaching the milk container
1. Remove the lid (g. 15);
2.Fillthemilkcontainerwithasucientquantityofmilk,
notexceedingtheMAXlevelmarkedonthehandle(g.
16). Each mark on the side of the container corresponds to
100 ml of milk.
Please note:
•Foradensermoreevenfroth,youmustuseskimmedor
partially skimmed milk at refrigerator temperature (about
5°C).
•If“energysaving”modeisenabled,youmayhavetowait
a few seconds before the rst cappuccino is delivered.
3. Make sure the milk intake tube is correctly inserted in the
bottom of the milk container lid (g. 17).
4. Place the lid back on the milk container.
5. Remove the hot water spout from the connection nozzle
(g. 18).
6. Attach the container to the connection nozzle and push as
far as it will go (g. 19). The machine emits a beep.
7.Placeasucientlylargecupunderthecoeeandfrothed
milk spouts. Adjust the length of the milk spout. To move
it nearer the cup, simply pull it downwards (g. 20).
8. Follow the instructions below for each function.
Adjusting the amount of froth
Turn the froth adjustment dial to adjust the amount of froth
on the milk delivered while making cappuccino and milk based
coees.
Dial
position
Description Recommended for…
No froth HOTMILK
Min. froth
CAPPUCCINO /
LATTE MACCHIATO /
LATTE SCHIUMATO
Max. froth
Making cappuccino or macchiato
1. After attaching the milk container, turn the froth regulator
on the milk container lid to the required position (g.
21).
2. Press the CAPPUCCINO button. “CAPPUCCINO” is displayed,
together with a progress bar which lls gradually as
preparation proceeds.
3. After delivering the milk, the machine automatically
makes the coee.
Please note:
•Ifduringdeliveryyouwanttostoppreparation,pressthe
CAPPUCCINO button twice.
•At the end of delivery, to increase the quantity of milk or
coee in the cup, within 3 seconds, press and hold the
CAPPUCCINO button.
•Do not leave the milk container out of the refrigerator
for long periods. The warmer the milk (5°C is ideal), the
poorer the quality of froth produced.
Making frothed milk (without coee)
Proceed as described in the previous paragraph (Making
cappuccino or macchiato), pressing the CAPPUCCINO button
twice instead of once.
Please note:
If during delivery you want to stop preparation, press the
CAPPUCCINO button once.
Preparing milk (unfrothed and without coee)
Proceed as described in the previous paragraph (Making frothed
milk), turning the froth regulator to the position.
Loading ...
Loading ...
Loading ...