Loading ...
Loading ...
Loading ...
9
Setting up the appliance
Please note:
•Coeehasbeenusedtofactorytesttheapplianceandit
is therefore completely normal for there to be traces of
coee in the mill. The machine is, however, guaranteed
to be new.
•Youshouldcustomisewaterhardnessassoonaspossible
following the Instruction for use in the section “Setting
water hardness” on page 10.
1. Plug the appliance into the mains socket and make sure
the main switch on the back of the appliance is in the I
position (g. 1).
You must rst choose the language by turning the selection
dial, or waiting until the languages scroll through on the
display at intervals of about 3 seconds:
2. When “English” appears, press the
button (g. 2) for
a few seconds until “English set” is displayed.
Follow the instructions indicated on the appliance display:
3.“FILLTANK”:extractthewatertank,lltotheMAXline
with fresh water (g. 3A), then put back in the appliance
(g. 3B).
4. “INSERT WATER SPOUT”: Check that the hot water spout is
inserted on the connection nozzle and place a container
holding a minimum of 500 ml underneath (g. 4).
5. “HOT WATER Conrm?” is displayed;
6. Press the button to conrm (g. 2). The
appliance delivers water from the spout then goes o
automatically.
The coee machine is now ready for normal use.
Please note:
•Whenusingtheapplianceforthersttime,youneedto
make 4-5 cups of coee or 4-5 cappuccinos before it starts
to give satisfactory results.
•Whenmakingtherst5-6cappuccinos,itisnormal
to hear the noise of boiling water. After this, the noise
becomes less.
•To enjoyyourcoee even moreand improve the
performance of your appliance, we recommend installing
a water softener lter as described in the section “INSTALL
FILTER”. If your model is not provided with a lter, you can
request one from De’Longhi Customer Services.
TURNING THE APPLIANCE ON
Please note:
Before turning the appliance on, make sure the main switch on
the back of the appliance is in the I position (g. 1).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
•Toturntheapplianceon,pressthe
button (g. 5).
The message “Heating up Please wait” is displayed.
After heating, the message “Rinsing” is displayed. As well as
heating the boiler, the appliance also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coee appears.
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the button (g. 5). The
appliance performs a rinse cycle, then the message “Turning o
Please wait” is displayed and the appliance goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
•rstturntheapplianceobypressingthebutton
(g. 8);
•releasethemainswitchatthesideoftheappliance(g.
2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
When you access the settings menu by pressing the P button, the
following menu items can be selected:
Descaling
For instructions on descaling, see page 16.
Install lter
For instructions on how to install the lter, see the section
“Installing the lter (page 17).
Loading ...
Loading ...
Loading ...