Loading ...
Loading ...
Loading ...
Max Mcast Ingress Enter a maximum multicast ingress bandwidth limit (in Kbps).
RTS Threshold
Enter the packet size threshold to determine when the device will issue a RTS before
sending the packet.
Fragmentation Threshold
Specify the maximum frame size threshold for before a data packet is fragmented. A
lower threshold reduces the time to transmit frames and reduces the possibility of data
corruption. The range is between 257 and 2346.
Force Roaming
Enable or disable force roaming. Clients will be forced to roam to another access point
once the signal strength falls below the set threshold.
Signal Strength Threshold Enter the signal strength threshold (in dbm) for clients to start roaming.
Enable Weak Signal Exception
Enable or disable weak signal exception. This allows clients with a weak signal to
connect to the SSID after a set number of attempts.
Allow weak RSSI Client
Associations After
Enter the number of times a client with a weak signal can try to connect, after which
the access point will allow the client to connect to it.
6. Click Save.
7. Click Push Configuration.
Deleting an SSID
1. Navigate to Configure > Access Point > Profiles.
2. From the Profile list, click SSID under the Actions column of the Profile the SSID you wish to delete belongs to.
3. From the SSID list, click the checkbox next to the SSIDs you wish to delete.
4. Click Delete.
5. When prompted to confirm, click Yes.
Configuring Profile Radio Settings
Loading ...
Loading ...
Loading ...