D-Link DBA-3621P User Manual

Loading ...

6. Click Save.

7. Click Push Configuration.

Configuring Switch Profile IPv4 ACL Settings

Creating IPv4 Access Control Policy Rules

IPv4 Access Control Lists (ACL) allow administrators to configure a set of criteria for permitting or denying traffic coming from

and to the switch based on IP address.

1. Navigate to Configure > Switch > Profiles.

2. From the Profile list, click Settings under the Actions column of the Profile you wish to edit.

3. Click the IPv4 ACL tab.

4. In the User Defined IPv4 Rules section, click Add.

5. In the Add IPv4 rules window, specify the following information:

Policy

Select an access policy.

Permit : Traffic with matching parameters will be forwarded.

Deny: Traffic with matching parameters will be denied.

Protocol

Select a protocol from the drop-down menu.

Any : The rule applies to any protocol traffic.

UDP: The rule only applies to traffic with a UDP header.

TCP: The rule only applies to traffic with a TCP header.

Source

Enter the source IP address. If the source address is configured as Any, all source traffic

will be evaluated according to the conditions of the rule.

Src port

Specify the source port number between 0 and 65535.

If the source port is configured as Any, all source ports will be evaluated according to

the conditions of the rule.

Loading ...

D-Link DBA-3621P Nuclias Wireless AC1300 Wave 2 Outdoor IP67 Cloud Managed Access Point