Loading ...
Loading ...
Loading ...
Changing the Device Connection Type to DHCP
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Basic tab in the top-right of the screen.
3. In the IP Connection section, select a DHCP as the Type.
Note: Changing the connection type may disrupt the connection to the Nuclias Cloud.
4. When prompted to confirm, click Yes.
5. Select a VLAN ID from the drop-down menu to assign the switch to a VLAN.
Note: VLAN and Voice VLAN settings can be configured on the Profile Basic Settings page. Refer to the
Configuring
Basic Switch Profile Settings section for more information.
6. Click Apply.
Changing the Device Connection to Static IP
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Basic tab in the top-right of the screen.
3. In the IP Connection section, select a Static IP as the Type.
Note: Changing the connection type may disrupt the connection to the Nuclias Cloud.
4. When prompted to confirm, click Yes.
5. Specify the following information:
Local IP Enter a valid IP address.
VLAN [Optional] Check to enable VLAN functionality. This segments traffic on the SSID.
Subnet Mask Enter a Subnet Mask.
Gateway Enter a default gateway address.
DNS #1 Enter a primary DNS address.
DNS #2 [Optional] Enter a secondary DNS address.
DNS #3 [Optional] Enter a tertiary DNS address.
6. Click Apply.
Viewing and Customizing the Switch Performance Summary
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Summary tab in the top-right of the screen.
3. In the Connectivity and CPU Utilization sections, select a time frame from the drop-down menu to show data for the
specified time frame. Click the refresh icon to renew the data.
Loading ...
Loading ...
Loading ...