Loading ...
Loading ...
Loading ...
1. Navigate to Configure > Access Point > Profiles.
2. From the Profile list, click SSID under the Actions column of the Profile of the SSID you wish to edit.
3. From the SSID list, click the SSID name of the SSID you wish to edit.
4. In the SSID configuration window, click the Advanced tab.
5. Specify the following information:
Max Clients
Enter the maximum number of concurrent clients that can connect to the SSID. The
maximum is 64.
Max Allowed Client Retries
Enter the maximum amount of times a client can attempt to reconnect to the SSID once
the maximum client limit has been reached. After retrying the set amount times, the
client will associate with the AP for a maximum of up to 128 clients.
Note: If set to 0, no additional clients will be accepted by the AP despite the amount of
retries.
Max Upstream Enter a maximum uploading bandwidth limit (in Kbps) for this SSID.
Max Downstream Enter a maximum downloading bandwidth limit (in Kbps) for this SSID.
Max Client Upstream
Enter a maximum uploading bandwidth limit (in Kbps) for each client connected to this
SSID.
Max Client Downstream
Enter a maximum downloading bandwidth limit (in Kbps) for each client connected to
this SSID.
Forward Bonjour Pkts
Enable or disable the forwarding of Apple Bonjour packets from wireless clients to the
rest of the network.
IGMP Snooping
Enable or disable IGMP Snooping. This allows the SSID to listen in on IGMP
conversations on the network.
Loading ...
Loading ...
Loading ...