D-Link DBA-3621P User Manual

Loading ...

Destination

Enter the destination IP address. If the destination address is configured as Any, all

destination traffic will be evaluated according to the conditions of the rule.

Dst port

Specify the destination port number between 0 and 65535.

If the source port is configured as Any, all source ports will be evaluated according to

the conditions of the rule.

Comment Enter a description for the rule.

6. [Optional] Click Add to add additional rules.

7. Click Add.

8. Click Save.

9. Click Push Configuration.

Editing IPv4 Access Control Policy Rules

1. Navigate to Configure > Switch > Profiles.

2. From the Profile list, click Settings under the Actions column of the Profile you wish to edit.

3. Click the IPv4 ACL tab.

4. In the policy rules list, click Edit in the Actions column of the rule you wish to edit.

5. Specify the following information:

Policy

Select an access policy.

Enable : Traffic with matching parameters will be forwarded.

Deny: Traffic with matching parameters will be denied.

Protocol

Select a protocol from the drop-down menu.

Any : The rule applies to any protocol traffic.

UDP: The rule only applies to traffic with a User Datagram Protocol (UDP) header.

TCP: The rule only applies to traffic with a Transmission Control Protocol (TCP) header.

Source

Enter the source IP address. If the source address is configured as Any, all source traffic

will be evaluated according to the conditions of the rule.

Src port