Loading ...
Loading ...
Loading ...
15. Wi-Fi/Bluetooth
415
Connecting by Manual Input
1
In the screen in Step
1
of “[From List]”, select [Manual Input]. (l
414)
2
Enter the SSID of the wireless access point you are connecting to, and
then select [Set].
0
For information on how to enter characters, refer to page
369.
3
Select the network authentication type.
4
(When other than [No Encryption] is selected)
Enter the encryption key and then select [Set].
0 Check the SSID, security type, encryption type, and encryption key of the
wireless access point you are using.
[WPA2-PSK]
Supported encryption methods: [TKIP], [AES]
[WPA2/WPA-PSK]
[No Encryption] —
0 Check the operating instructions and settings of the wireless access point.
0 If a connection cannot be made, the signal strength of the wireless access
point may be too weak.
For details, refer to “Message Displays” (l
456) and
“
Troubleshooting”
(
l 459).
0 Depending on your environment, the communication speed with the wireless
access point may decrease, or the wireless access point may not be available
for use.
Loading ...
Loading ...
Loading ...