Loading ...
Loading ...
Loading ...
Cockpit60
Displayed categories
The display in the instrument panel shows the mileage and
trip recorder as well as the selector lever position.
Warning and indicator lights: “Warning and indicator lights”
Clock: “Setting the time”. In some vehicles the ambient temperature is
displayed to the right of the clock.
There are optional and automatic displays in this field.
- Optional indications: eg. Multi-function (MFD) and outside temperature
display
- Automatic indications: information messages or warnings: “Warning
and information messages on the screen”
- The Screen shows menus with further information and which can be used
to make diverse settings: “Instrument panel menus”
Distance display or flexible service interval display: “Distance display or
flexible service interval display”
Selector lever position display for the automatic gearbox. The actual
position of the selector lever or the gear which is engaged (for Tiptronic)
are highlighted.
Mileage display or Service Interval Display
Distance display
The left-hand counter in the display registers the total amount of distance
covered by the vehicle.
The right-hand counter registers the short journeys. The last digit indicates
steps of 100 metres. The trip recorder counter may be reset by the reset
button ⇒ page 56, fig. 33 .
Service interval display
A Service pre-warning will appear in the mileage displays if a service is due
soon. A “spanner” symbol appears and the display “km” with the distance
that can be driven until the next service appointment is due. The display will
change after approximately 10 seconds. A “clock symbol” appears and the
number of days until the service appointment should be carried out. The
instrument panel displays the following message
5)
: SERV. IN... KM OR...
DAYS. The service message will disappear approximately 20 seconds after
the ignition is switched on or the engine is running. The normal display can
be resumed by pressing the reset button on the trip counter or by pressing the
rocker switch of the MFI ⇒ page 61, fig. 39 .
With the ignition switched on, you can call up the current service message by
pressing the trip counter reset knob for 2 seconds.
Fig. 38 Digital display in
the instrument panel
A
1
A
1
A
2
5)
Depending on the model version
A
3
A
4
A
5
A
B
toledo ingles.book Seite 60 Mittwoch, 11. April 2007 1:25 13
Loading ...
Loading ...
Loading ...