Loading ...
Loading ...
Loading ...
Seats and stowage 133
Safety First Operating instructions Tips and Maintenance Technical Data
The seats may be moved forwards or backwards independently. The
movement can be 1/3 or 2/3 of the seat. There are various possible
positions.
Adjusting reach
– In the seated position, unlock the lever in the direction of the
arrow ⇒ page 132, fig. 96.
– Move the seat cushion forwards or backwards to the desired
position.
Backrest angle adjustment
– Hold the backrest at the top. Pull the loop on the side of the seat
⇒ page 132, fig. 97 in the direction of the arrow and hold the
loop in this position. Push the backrest to the required position
and release the loop.
WARNING
• Adjust the seat only when the vehicle is stationary. Otherwise your seat
could move unexpectedly while the vehicle is moving. This could increase
the risk of an accident and therefore injury.
• Do not push the seatbacks down until the seat is moved, this is to avoid
damage to the centre console.
• Ensure that the seat, once moved, is fixed in position.
Note
• In order to maintain the maximum luggage compartment space, put the
seatbacks in position normal, without moving.
• In order to maintain the maximum space without putting the seatbacks
down, move the seats forward to the desired position.
Folding the seat backrests down
– Pull the loop on the side of the seat ⇒ fig. 98 .
In this position the back rest is locked. This is the reason why the loop located
on the side of the seat must be pulled in the direction of the arrow to open the
backrest.
WARNING
• You should check that the backrest has engaged properly in position
after the loop is released.
• The locking system loops on the seats may not, for reasons of safety, be
used to secure any items.
A
1
Fig. 98 Folding or
opening the rear seat
backrests
A
1
toledo ingles.book Seite 133 Mittwoch, 11. April 2007 1:25 13
Loading ...
Loading ...
Loading ...