Loading ...
Loading ...
Loading ...
LUBRiCATiON
The saw motor bearings have been packed at the
factory with proper lubricant and require no
additional lubrication,
The following parts should be oiled occasionally
with SAE Noo 20 or No, 30 engine oil
1_Elevation guide slot and pivot
2, Elevation screw threads,
3., Bevel screw threads (First clean with Craftsman
Gum & Pitch Remover.)
4 Bevel and elevation link pivot points
5 Cradle pivot pin bearing points
6, Bearing points in miter gauge and rip fence
The saw table and other major parts are made of
aluminum and require no special care. A coat of
automobile-type wax applied to the table will help to
keep the surface clean and allow workpieces to slide
more freely, Treat unplated and unpainted steel
parts and surfaces with Sears "Stop Rust "
BEARING POINTS
ELEVATION .7 I
SCREW
ELEVATION
LINK
ELEVATIOI'
, GUIDE SLOT I
AND PIVOT tl LD
IN CRADLE tl I
32
Loading ...
Loading ...
Loading ...