Loading ...
Loading ...
Loading ...
14 electrolux.com.au
All models
Align the front of the top trim to the front of the refrigerator
and attach with screws (8H) and spacer 2H (Non French
Door models only) as shown. (Fig. 22)
Single
Dual
2x8H
2x8H
2x8H
2x2H
2x8H
Spacer(2H)
not required
for french door
Side trim install
a. Attach a shoulder screw into the lower side hole on
outward facing side of levelling systems (Fig. 23).
For dual installation, do this only on the extreme left
and extreme right levelling systems.
6H
b. Locate slot in right hand side trim over shoulder
screw.
c. Locate side trim over the top trim and attached with
countersunk self tapping screws (5H) (Fig. 25). Push
side trim again against refrigerator to close gap
before tightening.
5H
d. Assemble the left hand side trim to the appliance
using the same method.
Push the appliance(s) carefully into the cabinetry
cavity until the trims are close to the cabinetry front
faces. (Fig. 26)
Figure 22
Figure 25
Figure 23
Figure 24
Loading ...
Loading ...
Loading ...