Loading ...
Loading ...
Loading ...
11
STEP 2 - JOINING THE REFRIGERATORS
FOR DUAL REFRIGERATOR INSTALLATION
ON LY
Carefully pull the refrigerators together adjacent to the final
installation location, then adjust the front and rear feet to
the same height.
Top-front and bottom-rear bracket installation
Install the top-front bracket
• Assemble the top-front bracket, fit the screws (8H) in
place, but do not tighten them yet leave the screws
loose.
do not tighten
Install the bottom rear bracket
• Remove 2 screws at the bottom of rear panel
• Assemble the rear-bottom rear bracket to the
refrigerators using the original screws and tighten.
Bottom-front bracket installation
Position the bottom-front bracket
• Position the bottom-front bracket between the
two refrigerators.
• Fasten with the two M4 screws using a Phillips
head screwdriver.
• Pull tensioner towards front to allow fitment of
centre trim
Lift top-front
bracket
Slide centre
cover under
Tensioner
screw
extract the
tensioner
Fit the centre cover
• Push the centre trim between the two refrigerators
• Engage the bottom end of the centre trim into the
tensioner of the bottom-front bracket. (Fig. 12)
• Lift the top-front bracket (screws should be loose
enough) and slide the centre trim underneath.
(Fig. 13)
• Tighten the screws in the top-front bracket. (Fig. 14)
• Adjust the tensioner screw as required. (Fig. 15)
• Fasten the centre trim to the top-front bracket using
the provided self-tapping screw. (Fig. 16)
Lift top-front
bracket
Slide centre
cover under
Tensioner
screw
fit bottom first
Figure 9
Figure 10
Figure 11
Figure 12
Loading ...
Loading ...
Loading ...