Loading ...
Loading ...
Loading ...
en Time-setting options
16
No. Foods Accessories Weight range in
kg
Information
Pork neck joint Cookware with lid
On the lower wire rack
0,5-2,0
Lamb, medium Cookware with lid
On the lower wire rack
0,8-2,0 Shoulder joint or boned
leg of lamb
Meatloaf Cookware without lid
On the lower wire rack
0,5-1,5 The meat loaf should not
be thicker than 7cm.
Fish, whole Cookware without lid
On the lower wire rack
0,3-1,0 Scale the fish before-
hand. Place the fish in
the cookware in its
"swimming position".
Rice stew with fresh in-
gredients
Deep cookware with lid
On the lower wire rack
0,05-0,2 Add one part rice, three
parts water, four parts ve-
getables. Only use fresh
ingredients. Only enter
the weight of the rice.
9.3 Applying settings for dishes
1.
Set the function selector to .
a The display shows the first dish number and a de-
fault value for the weight.
2.
Use the rotary selector to set the required weight.
3.
Press .
4.
Turn the rotary selector to set the weight.
Before starting, you can use and to switch
between the dish and the weight.
a The appliance automatically sets the right cooking
time.
5.
Press .
After starting, the dish and weight cannot be
changed. The set weight can be displayed with .
a The appliance starts.
a lights up.
a You will see the cooking time counting down.
a For some programmes, a short audible signal
sounds when you have to stir or turn the dish.
6.
When the cooking time has elapsed:
‒ A signal sounds. The appliance stops heating.
‒ Turn the function selector to the off position.
9.4 Pausing operation
You can pause operation at any time.
1.
Press or open the appliance door.
a Operation is paused.
a flashes.
2.
To continue operation, close the appliance door and
press .
a Operation continues.
a lights up.
9.5 Stopping operation
You can stop operation at any time.
▶
Turn the function selector to the off position.
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
10 Time-setting options
Your appliance features time-setting options that you
can use to set the cooking time and the timer.
10.1 Checking the time-setting options
Requirement:If multiple time-setting options are set,
the corresponding symbols light up. During operation,
the timer and cooking time are available. In standby,
the timer and the time are available.
▶
Press until , or is in focus.
a The respective value is shown in the display.
10.2 Changing the time
Requirement:To change the time on the clock, the ap-
pliance must be switched off.
1.
Press twice.
a and the time appear on the display.
2.
Set the time using the rotary selector.
3.
Press .
a The time is set.
a If is not pressed, the set value is applied after a
few seconds.
Note:In order to reduce the energy consumption of
your appliance in standby, you can hide the time.
10.3 Cooking time
You can set a time after which operation ends automat-
ically. The maximum cooking time is 23 hours and 59
minutes.
Setting the cooking time
1.
Set the type of heating and temperature.
2.
Press until is in focus.
3.
Use the rotary selector to set the required cooking
time.
4.
Press .
Loading ...
Loading ...
Loading ...