Loading ...
Loading ...
Loading ...
Microwave en
13
Cookware and accessor-
ies
Reason
Accessories supplied The accessories supplied,
e.g. the wire rack, do not
create sparks in Micro-
Combi mode.
Metal baking tins Cakes will brown both on
top and on the bottom, as
baking tins made of metal
conduct heat more effi-
ciently.
Note:Metal may create
sparks, which could dam-
age the cooking compart-
ment and the inner door
pane. Metal must be kept
at least 2cm from the
cooking compartment
walls and the inside of the
door.
8.3 Testing cookware for microwave
suitability
Test cookware to see whether it is suitable for mi-
crowave use. Testing cookware is the only time the ap-
pliance should be operated in microwave mode without
any food inside.
WARNING‒Risk of scalding!
The accessible parts of the appliance become hot dur-
ing operation.
▶ Never touch these hot parts.
▶ Keep children at a safe distance.
1.
Place the empty cookware in the cooking compart-
ment.
2.
Set the appliance to run for 30 seconds to 1 minute
at maximum power.
3.
Press to start.
4.
Check the cookware several times:
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, the stop the cookware test. The cookware
is not microwave-safe.
8.4 Configuring the microwave settings
Different power levels and settings are available for dif-
ferent types of food and recipes.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶ Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
1.
Read the safety instructions →Page4 and the sec-
tion on how to prevent material damage →Page6.
2.
Read the information on microwave-safe cookware
and accessories. →Page12
3.
Set the function selector to .
4.
To set the required microwave power setting, press
.
5.
Use the rotary selector to set the required cooking
time.
6.
Press to start.
You can change the cooking time at any time during
operation using the rotary selector.
a The cooking time starts to count down and the mi-
crowave starts.
a Once the cooking time has elapsed, the microwave
stops and a signal sounds.
7.
When the dish is cooked, turn the function selector
to the off position.
8.5 Intervals for the time settings
The interval for setting a cooking time in microwave op-
eration changes with the length of the cooking time.
Cooking time Interval
0–1minutes 5seconds
1-3minutes 10seconds
3–15minutes 30seconds
15minutes – 1hour 1minute
1hour–
1hour30minutes
5minutes
8.6 Changing the microwave power
▶
Press .
Repeatedly pressing switches from the highest to
the lowest microwave power setting.
If the microwave function is only added after start-
ing, the appliance pauses. Press to start.
8.7 Pausing operation
You can pause operation at any time.
1.
Press or open the appliance door.
a Operation is paused.
a flashes.
2.
To continue operation, close the appliance door and
press .
a Operation continues.
a lights up.
8.8 Stopping operation
You can stop operation at any time.
▶
Turn the function selector to the off position.
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
Loading ...
Loading ...
Loading ...