Loading ...
Loading ...
Loading ...
Basic operation en
11
4.
Use the rotary selector to set the temperature to
180°C.
5.
Press .
a The appliance starts.
6.
After one hour, press .
7.
Turn the function selector to the off position.
a The appliance is cleaned.
a The appliance is switched off.
6.4 Cleaning the accessories
▶
Clean the accessory thoroughly with soapy water
and a soft dish cloth.
7 Basic operation
7.1 Switching on the appliance
▶
Turn the function selector to switch on the appli-
ance.
a The appliance is ready to use.
a A default value appears in the display.
7.2 Switching off the appliance
Switch your appliance off when you are not using it. If
no settings are applied for an extended period, the ap-
pliance switches itself off automatically.
▶
Turn the function selector to the off position.
a The appliance stops any ongoing functions.
a The time appears in the display.
a Some displays also remain visible in the display
when the appliance has been switched off.
7.3 Setting the type of heating and
temperature
1.
Use the function selector to set the required type of
heating.
a A default value appears in the display.
2.
If necessary, change the settings. To do this, touch
the appropriate field and use the rotary selector to
change the value.
3.
Press .
a The appliance starts.
a lights up.
a With a type of heating with temperature, the temper-
ature display lights up gradually.
4.
If necessary, use the rotary selector to change the
temperature while the oven is in operation.
When the appliance is in operation, you cannot set
the temperature to 40 °C.
7.4 Pausing operation
You can pause operation at any time.
1.
Press or open the appliance door.
a Operation is paused.
a flashes.
2.
To continue operation, close the appliance door and
press .
a Operation continues.
a lights up.
7.5 Stopping operation
You can stop operation at any time.
▶
Turn the function selector to the off position.
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
7.6 Rapid heating
To save time, you can shorten the preheat time for cer-
tain types of heating from a minimum temperature of
100°C.
You can use rapid heat-up for the following types of
heating:
¡ Hot air, exception: Hot air 40°C
¡ Hot air grilling
¡ Pizza setting
Configuring rapid heating
To ensure an even cooking result, do not place the ac-
cessory with the food in the cooking compartment until
rapid heating has finished. Do not set a cooking time
until rapid heating has finished.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
2.
Press .
a lights up in the display.
3.
Press .
a Rapid heating starts.
a lights up.
a Once the set temperature has been reached, the
rapid heating process ends. A signal sounds and
goes out in the display. Your appliance continues to
run with the set type of heating and temperature.
a Rapid heating is automatically deactivated within no
more than 15 minutes.
Cancelling rapid heating
▶
Press .
a goes out in the display. Your appliance continues
to run with the set type of heating and temperature.
7.7 Safety switch-off function
For your safety, the appliance has a safety switch-off
function. The appliance is automatically switched off if it
has been in operation for an extended period.
How long the appliance waits before switching itself off
depends on the setting:
¡ Hot air40°C: 24hours
¡ Hot air 100-230°C, circulated air grilling and pizza
setting: 5hours
¡ Grill: 90minutes
If the appliance has been switched off by the safety
switch-off function, is shown on the display. You can
confirm this message by pressing .
Loading ...
Loading ...
Loading ...