Loading ...
Loading ...
Loading ...
12 EVE611SA, EVE614BA EVE611SA, EVE614BA 13
Get to know your new oven with this
‘Simple Test Cake’
Although we strive for a perfect performing oven, it’s
possible that there will be some variation in colour when
baking. Therefore, we suggest this simple, easy and
delicious to make Simple Test Cake, it can help you
understand your new oven. All ovens do sometimes have
hot or cold spots, therefore it is important to judge with
your eye as you may require to rotate during baking.
‘Simple Test Cake’
125g butter, softened to room temperature
1 cup caster sugar
1 teaspoon pure vanilla essence
4 large eggs
2 cups self-raising flour
pinch of salt
4 tablespoons (80mL) full-cream milk
Method:
1. Butter base and sides of two, 20cm straight-sided
round or square cake pans. Then line the base with
grease proof or baking paper.
2. Preheat oven to moderate ‘180ºC’ (170ºC fan forced)
and ensure oven shelf is in the centre position of oven.
3. Cream softened butter and sugar until light in colour.
4. Add vanilla essence.
5. Then eggs one at a time, beating well after each
addition.
6. Sift flour and salt into the mixture and beat until
well combined.
7. Add milk and beat or stir to combine.
8. Spoon mixture equally between prepared cake pans.
9. Bake in preheated oven, middle shelf for about
25 to 35 minutes or until when tested with a fine
cake skewer it comes out clean or the edges of
the cakes have come away slightly from the sides
of the cake pans.
10. Remove from oven to wire cake rack and rest for
5 minutes before removing from cake pans.
Cool completely.
To Serve: sandwich together with your favourite jam
or conserve, and dust top with pure icing sugar.
Note: if desired substitute butter for either margarine
or olive oil spread. Recipe is based on the Australian
standard metric 250mL cup and 20mL tablespoon sets.
GETTING TO KNOW THE OVENUSING THE APPLIANCE
On completion of cooking
• The heat source will turn off, the timer will beep and
the end time and/or cook time ‘icons’ will flash.
• Even though the heating element turns off the oven
will still retain substantial heat. This will continue to
cook the food until it is removed or the oven cools
down. If you do not plan on being present when the
oven turns off, you should take this extra heating time
into account.
• Turn the function and temperature controls to the
off position.
• Touch any button to stop the timer beeping.
Adjusting the clock
• Touch the MODE symbol until the
clock icon
begins flashing.
• Touch the
+ and – symbols to change the time of day.
5 seconds after the last change, the clock icon will
disappear, confirming the time has been adjusted.
Setting the cooking end time
• Check that the clock displays the correct time of day.
• Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
• Touch the MODE Symbol until the end time
icon
begins flashing.
• Enter the time of day you want the cooking to finish by
using the
+ and – symbols. Five seconds after the last
change, the end time icon will stop flashing and the
current time will be displayed.
• To stop the beeper, touch any symbol.
Setting the delayed start cooking time
• Set the cook time and end time as described in the
previous sections.
• Once both the cook time and end time have been set,
both icons will stop flashing and the current time will
be displayed.
• To check or cancel settings:
To check settings, touch the MODE symbol until
the desired setting is displayed. The relevant icon
will flash.
To cancel ‘delayed start’ touch the MODE symbol until
the end time
icon flashes. Touch and hold the –
symbol until the clock no longer reverses (a beep will
be heard). If temperature and function knobs are still
at a setting, the oven will start once the end time
icon stops flashing.
• To cancel ‘auto shut off’ touch the MODE symbol until
the cook time icon flashes. Touch and hold the
– button until the clock no longer reverses (at 0:00 a
beep will be heard). This automatically cancels ‘auto
shut off’. If the temperature and function knobs are still
at a setting, the oven will start once the cook time
icon stops flashing. Because ‘auto off’ is cancelled the
oven will continue to heat until it is manually turned off.
Loading ...
Loading ...
Loading ...