Loading ...
Loading ...
Loading ...
43BDL4510D_50BDL4510D_55BDL4510D
1
1. Unpacking and Installation
1.1. Unpacking
•This product is packed in a carton, together with the standard accessories.
•Any other optional accessories will be packed separately.
•As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians.
•After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
•LCD display
•Quick start guide
•Remote control with AAA
batteries
•Power cord
•RS232 cable
•RS232 daisy chain cable
•IR Sensor Cable
•AC cover
•USB cover and screw x2
•Philips logo plate
* The supplied power cord varies depending on destination.
Quick start guide
Remote Control
and AAA Batteries
FORMAT
SOURCE
INFOLIST
OPTIONSADJUST
VOL
NORMAL
ID
ID SET ENTER
Power Cord RS232 Daisy Chain Cable
RS232 Cable
USB CoverAC Cover Screw x 2
LCD display
Philips logo plate
IR Sensor Cable
* Dierences according to regions.
Display design and accessories may dier from those illustrated above.
NOTES:
•For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and
complies with the safety regulations of the particular country.
•You might like to save the package box and packing material for shipping the display.
1.3. Installation Notes
•Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
•The product should be installed on a at surface, or the product may tip over. Leave a space between the rear of the product
and the wall for proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure
to do so may shorten the life of the internal parts.
•Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.
Loading ...
Loading ...
Loading ...