Loading ...
Loading ...
Loading ...
MOUNTING SAW
1. From among the loose parts, find the following
hardware:
4 Hex Head Screws, 5/16 - 18 x 1-1/4 in. long.
4 Hex Nuts, 5/16- 18 (approx. dia. of hole 5/16 in.)
4 Lockwashers, 5/16 in. External Type (approx.
dia. of hole, 5/16 in.)
8 Flat Washers, (dia. of hole 11/32 in.)
2. Place saw on legs so that holes in bottom of saw
line up with holes in top of legs.
3. Install screws, washers, Iockwashers and nuts as
shown.
SAW BASE
HEX HEAD SCREW _l I
FLAT WASHER----_
!
END _ ""
STIFFENER-_|
FLAT WASHER __
LOCKWASHER/_]:=
HEX NUT """/_
If you mount the saw on any other bench, make sure
that there is an opening in the top of the bench the
same size as the opening in the bottom of the saw so
that the sawdust can drop through. Recommended
working height is 33 to 37 inches from the top of the
saw table to the floor.
16-3/4"
15-1/;
I
r --
®
-@-
11-1/4
®
]
OPENING
7/16" DIA. HOLES .....
FRONTOFSAW
1/2"
9
Loading ...
Loading ...
Loading ...