Loading ...
Loading ...
Loading ...
Wiring
access panel
- 9 -
2. Remove the wiring access panel located underneath the lower front
cover by unscrewing three M4 screws from the front of the charging
station. Set the screws aside for reassembly. Lift o the wiring
access panel and set aside for reassembly.
3. Turn over the charging station before
installing the cable cradle. Align
the cable cradle’s screw holes with
the screw holes on the back of the
charging station. Use the two 4 mm
x 16 mm screws to attach the cable
cradle.
Note: If desired, the cable cradle may
be mounted to the wall separate
from the unit. Be sure to mount the
cable cradle securely to a stud or use
heavy-duty drywall anchors.
ASSEMBLING THE CHARGING STATION
1. Lay the charging station on a flat
surface and remove the lower
front cover. Unscrew the single M4
screw at the bottom of the unit.
Set the screw aside for reassembly.
Then, slide the cover down and lift
to disengage the tabs at the top of
the front cover. Set aside the lower
front cover for reassembly.
Loading ...
Loading ...
Loading ...