Loading ...
Loading ...
Loading ...
23
CONTROLS AND STARTING A WASH - CK MODELS
To start a wash programme
1 Press and hold
to turn the dishwasher on.
2 Check that the wash programme displayed is the one you would like to use. If not, see
section ‘Changing the wash programme.’
3 Once the display shows the programme you would like to use, press to start. The
display will show the approximate time remaining and the stage of the wash.
Note: the dishwasher will remember the last programme used.
To pause and restart a wash programme
1 Press to pause the programme. The programme status (eg ‘Wash’) will flash while the
dishwasher is paused.
2 Open the door very slowly.
IMPORTANT!
There is a risk of being sprayed with hot water. Do not fully open the door until the
spray arms have stopped rotating.
3 Load, remove, or rearrange any dishes if needed.
4 Press to restart the programme.
If the dishwasher is not restarted within 7 minutes, it will then beep every few seconds
until the cycle is restarted.
Changing the wash programme
Note: The dishwasher will remember the last programme used.
1 Press
to turn the dishwasher on.
2 Press Program to scroll to the desired wash programme.
The display will show the wash programme time.
3 Select a wash option (optional)
Press the ‘Options’ buttons to scroll between ‘Intensive’, ‘1/2 Load’ or off
(see ‘Selecting Wash options’).
4 Press
to start the wash programme.
At the end of the programme the dishwasher will beep. The Clean indicator will remain
lit and the display will show 0. After 30 seconds the display will turn off.
WASH PROGRAMME DESCRIPTION
Auto Senses the optimal wash programme for your dishes
Heavy A wash for heavily soiled dishes
Normal A wash for your everyday dishes
Normal Eco Helps you save energy and water for normal
soiled use
Fast A fast wash for lightly soiled dishes
Gentle For all your heat sensitive dishes
Hygiene A wash for sanitising your dishes
Rinse Prevents food from drying on dishes
Loading ...
Loading ...
Loading ...