Loading ...
2 contents Kelvinator Gas Continuous Flow hot water system
Congratulations and thank you for choosing our gas
continuous flow hot water system. Before you install the hot
water system, we recommend that you read through the
entire installation manual, which provides the description
of the hot water system, its functions and how to install it
correctly. To avoid the risks that are always present when you
install an appliance, it is important that the hot water system
is installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards.
After unpacking the hot water system please check it is not
damaged. If in doubt, do not use the hot water system but
contact your local Electrolux Customer Care Centre using the
number located at the back of this installation guide.
NOTE: The actual gas heating appliance that is part of this
gas continuous flow hot water system will here after be
refered to as "water heater" for the purposes of this manual.
The gas continuous flow hot water system as a whole may
also be refered to as "hot water system" for simplicity.
Meanings of symbols used in this manual are shown below:
warning
This symbol indicates information concerning your
personal safety
caution
This symbol indicates information on how to avoid
damaging the hot water system
environmental tips
This symbol indicates tips and information about
economical and ecological use of the hot water system
environmental tips
Information on disposal for users
• Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
• If you wish to discard this gas continuous hot water
system, please contact your local authorities and ask for
the correct method of disposal.
warning
• Contact an authorised installer for installation of this
hot water system.
• Contact an authorised service technician for repair
or maintenance of this hot water system.
• If a power cord is to be replaced, replacement work
must be performed by authorised personnel only.
• Installation work must be performed in accordance
with the national standards by authorised personnel
only. Wrong connection can cause over heating or fire.
• This hot water system should be installed in accordance
with AS/NZS 3000 and your local electrical wiring rules.
Important .......................................................................... 3
Important safety instructions ........................................... 4
For the plumber ................................................................ 5
Dimensions and connection points ................................... 6
Installation ......................................................................... 8
Clearances ......................................................................... 9
Gas connection ................................................................ 10
Water connection ............................................................ 11
Electrical connection ....................................................... 12
Remote controller .......................................................... 13
Remote controller Installation ........................................ 14
Commissioning Instructions ............................................ 16
Troubleshooting .............................................................. 18
Remote controller and PCB error codes ......................... 19
Warranty .......................................................................... 23
Conditions of use
This hot water system is intended to be used in household
and similar applications such as :
• staff kitchen areas in shops, ofces and other working
environments.
• farm houses.
• by clients in hotels, motels and other residential type
environments.
• bed and breakfast type environments
Congratulations Contents
Loading ...
Loading ...
Loading ...