Loading ...
Loading ...
Loading ...
28
Operation
English
4. SATURATION
Adjust the saturation of video output.
5. SHARPNESS
Adjust the sharpness of video output.
Speaker Setup
DOWNMIX
Select your desired sound effect when
there is no center speaker or subwoofer.
LT/RT: When playing a disc with PRO
LOGIC Dolby stereo effect, choose the
item to output audio signal with vivid
theatre effect.
STEREO: If you choose this item, for
audio signal with 5.1 channels, only signal
of the left and right channels will be
output; for audio signal with 2 channels,
the common stereo signal will be output.
VSS: If you choose this item, for a disc
recorded with 5.1 channels, the main
channel speakers can output audio signal
with VSS effect.
Digital setup
1. DYNAMIC RANGE
After selecting the compression mode of
LINE OUT, you can set this item to adjust
the linear compression ratio.
FULL: Set the Peak-to-Peak value of the
audio signal to minimum.
OFF: Set the Peak-to-Peak value to
maximum.
2. DUAL MONO
Select a desired audio output mode for
the left and right channels of signal.
It is mainly for Karaoke of Ac3.
There are 4 modes in all:
STEREO, MONO L, MONO R, MIX MONO
About Parental Control
Q: After insertion of a DVD into the disc
slot, a dialogue box appears, asking for a
password of 4 digits. Why?
A: This is because the movie you are playing
was rated with Parental Control, and the
current rating level of the unit is lower
than the one of the current disc. You must
input the right password and enter it into
the Parental Control setup menu and then
set an equal or higher rating level than the
one of the current disc.
Note:
● If you have not changed the password, the
factory preset password for the unit will
be empty. You will need to input a desired
password and verify it by inputting the
password again before entering the
Parental Control setup menu.
● For the rating level setup of Parental
Control of the unit, please refer to the
relative content of the SYSTEM SETUP
menu for details.
Accessories: Parental Control
The Parental Control function of a DVD player
can be used to control playback of movie
scenes on a DVD disc set with a rating level.
You can set the DVD player (including the
software player on a PC) with a certain rating
Loading ...
Loading ...
Loading ...