Loading ...
Loading ...
Loading ...
20
Operation
English
To turn on / off LOUD mode
Press and hold LOUD on the remote
control to turn on / off LOUD mode.
To adjust the sound equalizer
curves
1. Press SEL on the remote control (or
push the VOLUME -/+ knob on the front)
once or more to select a sound equalizer
curve: VOL, BAS (without preset EQ), TRE
(without preset EQ), BAL, or BEEP (ON/
OFF).
2. Rotate the VOLUME -/+knob on the front
panel (or press +/- button on the remote
control) to adjust level.
Select ZONE 1 / 2
Pressing ZONE 1 or ZONE 2 will turn on or off
the audio source in each of the different areas
which your speakers are connected.
"ZONE <1 >" or "ZONE <2>" will display on the
LCD once it is selected.
Return to the previous menu
Press the or TITLE on the remote
control.
Reset the unit
In case of incorrect display, button failure, or
distorted sound, you can press RESET with
a sharp object such as a clip to reset the unit
and load its factory default settings.
Radio Operation
Select a radio region
In RADIO mode, press and hold for about
5seconds to select your desired radio region:
EUROPE, USA1, USA2, or AUSTRALIA.
Select AM/FM band
In RADIO mode, press and hold button on
the front panel or briefly press on the
remote control to select your desired radio
band of FM1, FM2, FM3, AM1, AM2, and the
selected band will be displayed on the LCD of
the front panel.
Tune to / search for radio stations
In RADIO mode:
● Press and hold
/ on the front panel
(or press and hold / on the remote
control) to automatically search down/
up for a available station from the current
frequency.
● Press
/ on the front panel (or press
/ on the remote control) to manually
search up or down for your desired
station from the current frequency.
Use the / APS button
In RADIO mode:
1. Press and hold
on the front panel (or
APS on the remote control)to search
for radio frequencies with sufficient
signal strength (starting from the lowest
frequency and ending until the search
cycle is finished).
Then the 6 strongest stations are preset
to the memory bank of the corresponding
preset number. The AS operation is
implemented in each bank of the selected
band. When the AS operation is finished,
radio broadcast will resume on M1. (A total
of 3x6 stations for FM and 2x6 stations
for AM can be stored.)
Loading ...
Loading ...
Loading ...