Loading ...
Loading ...
Loading ...
EN
49
Cleaning and Maintenance
www.bora.com
i
Do not use stainless steel care products on the stainless
steel surfaces or the stainless steel grill surface.
i
Use the Tepan stainless steel grill cleaning function for
cleaning (see Operation chapter).
Light soiling
XX
Make sure that the cooktop is switched off (see the Operation
chapter).
XX
Wait until the stainless steel grill surface has cooled.
XX
Remove light soiling with a damp cloth and detergent.
XX
To prevent water or limescale stains (yellowish colouring), use
a soft cloth to dry off the surfaces that have been cleaned
with water.
Normal soiling
XX
Ensure that the cleaning function is activated for both grilling
zones (see the Operation chapter).
XX
Wait until the grilling zone indicators are no longer flashing (=
optimum cleaning temperature of 70°C).
XX
Use only clean, cold water on the grill surface.
XX
Leave the water to work for 15 minutes.
XX
Then remove all coarse dirt and food residues using a Tepan
spatula.
XX
Remove the remaining dirt and water with a clean cloth.
XX
Dry the cooktop with a clean cloth.
Heavy soiling
XX
Ensure that the cleaning function is activated for both grilling
zones (see the Operation chapter).
XX
Wait until the grilling zone indicators are no longer flashing (=
optimum cleaning temperature of 70°C).
XX
Dilute a dessert spoon of citric acid (approx.10 –15ml) in a
bowl of warm water (approx.200ml).
XX
Pour the liquid on the grill surface.
XX
Leave the solution to work for approx. 5 – 8 minutes.
XX
Loosen burned-on food from the grill surface with a plastic
brush.
XX
Remove all remaining dirt and water (citric acid solution) with
a clean cloth.
XX
Use only clean, cold water on the grill surface.
XX
Remove the remaining dirt and water with a clean cloth.
XX
Dry the cooktop with a clean cloth.
Any changes in colour or small scratches are not damage to the
cooktops. They do not affect the functionality of the cooktop or
the stability of the stainless steel grill surface.
Changes in the colour of the cooktop are the result of residues
which have not been removed and have burnt on.
8.4.3 Cleaning the components on gas
cooktop CKG
Cleaning the pan supports
i
The surface of the pan support will become duller with
the passing of time. This is quite normal and does not
mean that the material is damaged.
8.4 Cleaning the cooktops
8.4.1 Cleaning glass ceramic (CKFI, CKI,
CKIW, CKCH, CKCB, CKG)
XX
Make sure that the cooktop is switched off
(see the Operation chapter).
XX
In the case of gas cooktop CKG, make sure the gas supply is
interrupted and switched off.
XX
Wait until all cooking zones are cold.
XX
Remove all coarse dirt and food residues from the cooktop
using a glass ceramic scraper.
XX
Apply the cleaning agent to the cold cooktop.
XX
Spread the cleaning agent using kitchen roll or a clean cloth.
XX
Wipe the cooktop clean with a damp cloth.
XX
Dry the cooktop with a clean cloth.
If the cooktop is hot:
XX
Remove stubborn residues of plastic, aluminium foil, sugar or
sweet dishes from the hot cooking zone immediately using a
glass ceramic scraper to prevent burning.
Heavy soiling
XX
Remove heavy soiling and marks (limescale marks, mother-
of-pearl-like shiny marks) using cleaning products while the
cooktop is still warm.
XX
Wipe off food that boils over with a damp cloth.
XX
Remove any remaining dirt with the glass ceramic scraper.
XX
Always remove any seeds, crumbs or similar that fall onto the
cooktop during cooking immediately to prevent the surface
getting scratched.
Any changes in colour or glossy spots are not damage to the
cooktops. They do not affect the functionality of the cooktop or
the stability of the glass ceramic panel.
Changes in the colour of the cooktop are the result of residues
which have not been removed and have burnt on.
Glossy spots are the result of wear by the pan base, especially
if aluminium-based cookware or unsuitable cleaning agents are
used. These are difficult to remove.
i
In the case of gas cooktop CKG, due to the use of
enamelled cast iron parts, slight colour variations and
irregularities are common. Furthermore, flash rust
can appear at the support points, which can be easily
removed with a damp cloth. These spots are normal and
are not considered an impairment.
8.4.2 Cleaning Tepan stainless steel grill
surfaces (CKT)
i
Use the scraper only on the grill surface as otherwise
other surfaces may be damaged.
i
Clean the stainless steel surface in the polishing direction
only.
i
Do not apply citric acid to surfaces adjacent to the
cooktop and worktop as the acid may damage them.
Loading ...
Loading ...
Loading ...