Loading ...
Loading ...
Loading ...
EN
27
Operation
www.bora.com
5.3.3 Switching off
XX
Long press on the power button until acoustic signal is
heard
XO
The switching off animation appears and the display goes out.
The cooktop extractor was switched on:
XO
The fan symbol flashes and the automatic after-run function is
started.
XO
As soon as the after-run period is over, the switching off
animation appears and the display goes out.
The cooktop was switched on:
XO
In the case of previously active and still hot cooking zones,
the residual heat symbol
lights up in signal red and
H
is
displayed.
XO
The display goes out when no more residual heat is present.
i
The system can be switched off at any time: Long press
on the power button
5.3.4 Control lock
Activating the control lock
XX
Long press on the lock button
XO
The operating panel display is dimmed.
XO
The lock button lights up.
XO
All functions except for the power button and lock button are
locked.
i
If the system is switched off when the control lock is
active, the control lock will no longer be active next time
the system is switched on.
Deactivating the control lock
XX
Long press on the lock button (3 sec.)
XO
The operating panel display lights up and the operating panel
is active again.
XO
The lock button is dimmed.
5.3.5 Cleaning lock (wipe function)
Activating the cleaning lock
XX
Tap the cleaning button
XO
The operating panel display is dimmed.
XO
The cleaning button lights up.
XO
The operating panel is locked.
XO
All settings stay the same.
XO
The countdown starts in the multi-function display.
Time lapsed
XO
After the end of the time set, the operating panel is
automatically unlocked.
i
If the system detects that the operating panel has been
covered for a prolonged period (> 8 sec.) when the
cleaning lock is active, after deactivating the cleaning
lock all active cooking zones are automatically paused.
5.3 Operating the system
5.3.1 Operating principle
Operation Command
Tap a function Activating a function
Long press on a function Deactivating a function*
Swipe (slider) Setting a value (e.g. power level)
Tab. 5.2 Operating principle
5.3.2 Switching on
XX
Long press on the power button until acoustic signal is
heard
XO
The icon lights up and the switching-on animation is shown in
the slider.
XO
Once the system has started successfully, the standard
display appears in the operating panel.
Fig. 5.1 Standard display after switching on
i
The menu button does not appear after switching on if
there is still residual heat in one of the cooking zones.
i
When the childproofing feature is active, the lock button
lights up after system start. The standard display
is only shown when it has been deactivated (also see
Childproofing feature).
i
If
1
C
o
n
F
appears in the display after switching on the
system, the basic configuration is still incomplete and
must be carried out (see Initial operation chapter).
Loading ...
Loading ...
Loading ...