Loading ...
Loading ...
Loading ...
EN
23
Appliance description
www.bora.com
4.4.2 Cleaning lock (wipe function)
The cleaning lock prevents settings from being changed when
wiping the operating panel during a cooking session. Upon
activation the operating panel is locked for a certain time
(factory setting 15 seconds). The remaining time is displayed.
All appliance settings remain unchanged in the meantime.
The duration of the wiping time can be set in the menu (5 – 30
seconds).
i
If the operating panel is cleaned with a damp cloth, a film
of water may form and the power button may be triggered
despite the cleaning lock being activated. This can be
corrected by drying the panel immediately after cleaning.
4.4.3 Safety shut-down
If the appliance is switched on but not used for 2 minutes,
it will automatically switch off (standby mode).
Cooktop extractor
The cooktop extractor will be automatically switched off
30 minutes after all cooking zones have become inactive
(= power level 0) and the automatic after-run function will be
started.
Cooktops
Each cooking zone is automatically switched off after a
predefined operating time in which the power level has not been
changed.
Power levels Safety shut-down after hrs:min
Cooktops CKFI,
CKI, CKIW, CKT
Cooktops CKCH,
CKCB
Cooktop
CKG
1
08:24 06:00 08:24
2
06:24 06:00 06:24
3
05:12 05:00 05:12
4
04:12 05:00 04:12
5
03:18 04:00 03:18
6
02:12 01:30 02:12
7
02:12 01:30 02:12
8
01:48 01:30 01:48
9
01:18 01:30 01:18
ßp
00:10 0:10 (only in the
case of CKCH)
00:20
Tab. 4.20 Safety shut-down for power levels
Warming level Safety shut-down after hrs:min
1 (
,
)
08:00
2 (
:
)
08:00
3 (
*
)
08:00
Tab. 4.21 Safety shut-down for warming levels
XX
Switch the cooking zone back on if you want to put the
cooking zone back into operation (see Operation chapter).
Bridging function
With the bridging function two cooking zones can be combined
to form one large cooking zone. The power for the combined
zones is then adjusted by a single operating control. Power
adjustment takes place simultaneously (both cooking zones are
operated on the same power level).
The bridging function is suitable for heating food, e.g. in a
roaster.
Pan size recognition on induction cooktops
The cooking zone automatically detects the size of the cookware
and only focuses the energy on that area. It also recognises
cookware that is unsuitable or too small or if there is no
cookware present.
A cooking zone is not working if
v
,
is flashing in the display. This
happens if...
XO
... it is switched on without cookware or with unsuitable
cookware.
XO
... the base diameter of the cookware is too small.
XO
... the cookware is removed from a cooking zone that is
switched on.
If no pot is recognised 9 minutes after setting a power level, the
cooking zone will switch off automatically.
Cooking zone timer (automatic cut-off)
When cooking zones are in operation, the automatic cut-off
function automatically switches off the selected cooking zone
once a preset time has lapsed.
If the selected cooking zone is not active when the timer is
started, only an acoustic signal will be heard when the time has
lapsed.
The timer function can be used on up to 4 cooking zones
(multi-timer).
Pause function
With the pause function all cooking zones can be quickly and
easily deactivated temporarily. When the function is cancelled,
operation resumes at the original settings.
The cooking session can be paused for max. 10 minutes. Once
10 minutes have lapsed, all cooking sessions are automatically
ended.
Cleaning function on the Tepan stainless steel grill
The cleaning function adjusts the Tepan stainless steel grill to
a constant temperature of 70 °C, which is perfect for cleaning.
This temperature is then maintained for 10 minutes.
4.4 Safety devices
4.4.1 Control lock
The control lock prevents unintentional use of the cooktop
extractor and cooktops during operation.
XO
If the control lock is active, the symbol lights up.
XO
The functions are locked and the indicators on the display are
dimmed (exception: power button).
Loading ...
Loading ...
Loading ...